[bksvol-discuss] Re: JAWS and the PageBreak Issue

HI Sandi,

Glad you got it all straightened out!

Mayrie

 

-----Original Message-----
From: bksvol-discuss-bounce@xxxxxxxxxxxxx
[mailto:bksvol-discuss-bounce@xxxxxxxxxxxxx] On Behalf Of Sandi Ryan
Sent: Tuesday, November 29, 2011 2:58 PM
To: bksvol-discuss@xxxxxxxxxxxxx
Subject: [bksvol-discuss] Re: JAWS and the PageBreak Issue

Hi Mary,

Thanks.  What I ended up doing was rebooting.  Then I discovered that the
clipboard menu had, for some reason, been added to my screen.  When I got
rid of that, things went back to normal--including the page breaks!  Whew!

Thanks much!
Sandi

----- Original Message -----
From: "Mayrie ReNae" <mayrierenae@xxxxxxxxx>
To: <bksvol-discuss@xxxxxxxxxxxxx>
Sent: Tuesday, November 29, 2011 4:10 PM
Subject: [bksvol-discuss] Re: JAWS and the PageBreak Issue


> Hi Sandi,
>
> Oh, my JAWS sometimes does that for no sensible reason too.
>
> I'll paste the instructions here for you to tell it to announce them.
>
> Let me know how it goes.
>
> See below.
>
> Mayrie
>
> To Make JAWS say "Page Break" in Word, you need to add the entry "page
> break" to your dictionary  If you use word, do the following
> 1.  open your document in word (any document will do for this).
> 2.  do insert-d to open the dictionary manager.
>
> 3.  There should already be a jaws word dictionary but jaws will ask to
> create the file if not.
> 4.  space on the "add" button.
> 5.  in the "actual word" field,type the backslash symbol and then 012
> unspaced from each other.
> 6.  in the "what you want jaws to say" field, type "page break"
> 7.  save with control-s and check in your document to see if page breaks 
> are
> announced now.
>
>
>
> -----Original Message-----
> From: bksvol-discuss-bounce@xxxxxxxxxxxxx
> [mailto:bksvol-discuss-bounce@xxxxxxxxxxxxx] On Behalf Of Sandi Ryan
> Sent: Tuesday, November 29, 2011 2:05 PM
> To: bksvol-discuss@xxxxxxxxxxxxx
> Subject: [bksvol-discuss] Re: JAWS and the PageBreak Issue
>
> Hi Mary,
>
> It's finding the page breaks, just not announcing them.
>
> Sandi
>
> ----- Original Message -----
> From: "Mayrie ReNae" <mayrierenae@xxxxxxxxx>
> To: <bksvol-discuss@xxxxxxxxxxxxx>
> Sent: Tuesday, November 29, 2011 2:03 PM
> Subject: [bksvol-discuss] Re: JAWS and the PageBreak Issue
>
>
>> Hi Sandi,
>>
>> Uh, so what you're saying is that your page breaks moved?  Are they hard
>> or
>> soft page breaks?  If you do a "find" for ^m does it take you to where 
>> you
>> think the page break shouldn't be?  I have no idea how they would move.
>> I'm
>> stumped.  But I wonder if I'm misunderstanding the problem. I'm sorry.
>> It's
>> apparent that I'm not helping.
>>
>> Mayrie
>>
>>
>>
>> -----Original Message-----
>> From: bksvol-discuss-bounce@xxxxxxxxxxxxx
>> [mailto:bksvol-discuss-bounce@xxxxxxxxxxxxx] On Behalf Of Sandi Ryan
>> Sent: Tuesday, November 29, 2011 12:00 PM
>> To: bksvol-discuss@xxxxxxxxxxxxx
>> Subject: [bksvol-discuss] JAWS and the PageBreak Issue
>>
>> Hi Mary,
>>
>> I know you discuss this from time to time, but I need to know what to do
>> to
>> show pagebreaks with JAWS.  I have not had this problem before, but this
>> morning, with a book almost ready to submit, I changed font and size and
>> aligned everything left--and suddenly I have no pagebreaks.  They were
>> there
>> till I did that, and if I look for ^m now, pagebreaks still show up--but
>> not
>> in the right places, I don't think.
>>
>> Thanks for any guidance you can offer!
>>
>> Sandi
>>
>> ----- Original Message -----
>> From: "Mayrie ReNae" <mayrierenae@xxxxxxxxx>
>> To: <bksvol-discuss@xxxxxxxxxxxxx>
>> Sent: Monday, November 28, 2011 10:13 PM
>> Subject: [bksvol-discuss] Re: Got into my old hard drive.
>>
>>
>>> Hi Roger,
>>>
>>> I only know generally what your problem is.  Your e-mails are stored in 
>>> a
>>> pst file.  I think that this file needs to be imported into your current
>>> e-mail program.  How to do that, I don't know.  Sorry if that's not
>>> sufficiently helpful, but it's a start.
>>>
>>> Mayrie
>>>
>>>
>>>
>>> -----Original Message-----
>>> From: bksvol-discuss-bounce@xxxxxxxxxxxxx
>>> [mailto:bksvol-discuss-bounce@xxxxxxxxxxxxx] On Behalf Of Roger Loran
>>> Bailey
>>> Sent: Monday, November 28, 2011 7:35 PM
>>> To: bksvol-discuss@xxxxxxxxxxxxx
>>> Subject: [bksvol-discuss] Got into my old hard drive.
>>>
>>> I managed to get into my old hard drive this evening. Thank you again
>>> Mike
>>> for the hard drive enclosure. It arrived today. I was able to recover 
>>> the
>>> book I was working on. At least I think I recovered it. As of yet I am
>>> unable to open it. I will be working on getting Open Book 9 and I hope I
>>> will be able to open it then. I don't seem to be able to find my emails
>>> though. After poking around for some time I did find what seems to be a
>>> folder labeled with the same label name I used in Outlook Express where
>>> they
>>> should be, but I am unable to open that either. When I try it mentions
>>> something about being a backup folder and wants me to check on line for 
>>> a
>>> program that will open it. I am not sure that it is even the folder I
>>> want
>>> because it is called a backup folder. I thought I would be able to just
>>> open
>>> it and read my stored emails. I expected not to be able to read the
>>> scanned
>>> books I had because they are all in ark format and I suppose I will need
>>> a
>>> working copy of Open Book to read those, but I don't know what the
>>> problem
>>> with the emails might be. Does anyone have any ideas?
>>> To unsubscribe from this list send a blank Email to
>>> bksvol-discuss-request@xxxxxxxxxxxxx
>>> put the word 'unsubscribe' by itself in the subject line.  To get a list
>>> of
>>> available commands, put the word 'help' by itself in the subject line.
>>>
>>> To unsubscribe from this list send a blank Email to
>>> bksvol-discuss-request@xxxxxxxxxxxxx
>>> put the word 'unsubscribe' by itself in the subject line.  To get a list
>>> of available commands, put the word 'help' by itself in the subject 
>>> line.
>>>
>>>
>>
>> To unsubscribe from this list send a blank Email to
>> bksvol-discuss-request@xxxxxxxxxxxxx
>> put the word 'unsubscribe' by itself in the subject line.  To get a list
>> of
>> available commands, put the word 'help' by itself in the subject line.
>>
>> To unsubscribe from this list send a blank Email to
>> bksvol-discuss-request@xxxxxxxxxxxxx
>> put the word 'unsubscribe' by itself in the subject line.  To get a list
>> of available commands, put the word 'help' by itself in the subject line.
>>
>>
>
> To unsubscribe from this list send a blank Email to
> bksvol-discuss-request@xxxxxxxxxxxxx
> put the word 'unsubscribe' by itself in the subject line.  To get a list 
> of
> available commands, put the word 'help' by itself in the subject line.
>
> To unsubscribe from this list send a blank Email to
> bksvol-discuss-request@xxxxxxxxxxxxx
> put the word 'unsubscribe' by itself in the subject line.  To get a list 
> of available commands, put the word 'help' by itself in the subject line.
>
> 

 To unsubscribe from this list send a blank Email to
bksvol-discuss-request@xxxxxxxxxxxxx
put the word 'unsubscribe' by itself in the subject line.  To get a list of
available commands, put the word 'help' by itself in the subject line.

 To unsubscribe from this list send a blank Email to
bksvol-discuss-request@xxxxxxxxxxxxx
put the word 'unsubscribe' by itself in the subject line.  To get a list of 
available commands, put the word 'help' by itself in the subject line.

Other related posts: