[bksvol-discuss] Re: HP SJ5590
- From: "robert tweedy" <roberttweedy@xxxxxxxxxxxxx>
- To: <bksvol-discuss@xxxxxxxxxxxxx>
- Date: Wed, 21 Feb 2007 09:02:16 -0600
I will try to find the drivers from June but the new ones are the ones I find
so far.
For skype contact bobwichitaks
For msn contact info rt5117@xxxxxxx no emails.
----- Original Message -----
From: Katie Hill
To: bksvol-discuss@xxxxxxxxxxxxx
Sent: Wednesday, February 21, 2007 8:34 AM
Subject: [bksvol-discuss] Re: HP SJ5590
HI Robert,
That is a good price! IT sounds like the price has come down a little since
last fall.
I still have the June 14th drivers installed and haven't heard a lot about
the new drivers.. Pros or cons.
You will enjoy the scanner!
Katie Hill
You can learn a lot if you are humble enough to listen.
Lynn Lewis Warren
Email: Kaitlyn@xxxxxxxxxxxxx
503-777-7155
------------------------------------------------------------------------------
From: bksvol-discuss-bounce@xxxxxxxxxxxxx
[mailto:bksvol-discuss-bounce@xxxxxxxxxxxxx] On Behalf Of robert tweedy
Sent: Wednesday, February 21, 2007 3:31 AM
To: bksvol-discuss@xxxxxxxxxxxxx
Subject: [bksvol-discuss] Re: HP SJ5590
I went ahead and got my from the plustek website. I probably could have
checked around but they had it on sale for $229.95 plus shipping. Okay, from
the discussions before I don't have to install the software, just go to the
plustek website and download the latest drivers but heard two different dates,
febuary of 2006 and june of 2006.
For skype contact bobwichitaks
For msn contact info rt5117@xxxxxxx no emails.
----- Original Message -----
From: robert tweedy
To: bksvol-discuss@xxxxxxxxxxxxx
Sent: Wednesday, February 21, 2007 4:35 AM
Subject: [bksvol-discuss] Re: HP SJ5590
Katie, where did you get your scanner? I am going with the plustek.
For skype contact bobwichitaks
For msn contact info rt5117@xxxxxxx no emails.
----- Original Message -----
From: Katie Hill
To: bksvol-discuss@xxxxxxxxxxxxx
Sent: Tuesday, February 20, 2007 11:07 PM
Subject: [bksvol-discuss] Re: HP SJ5590
I would have to echo Prattik's comments. Also being a bookedge scanner
you won't have to hold books down on the flat bed. I would say the most strain
would be when scanning a large hard cover book, balancing the book until the
two half's equal out a bit.
The scanner and Kurzweil both keep up as fast as I can flip and hit scan.
Quality all and all is very goodJ
Katie Hill
You can learn a lot if you are humble enough to listen.
Lynn Lewis Warren
Email: Kaitlyn@xxxxxxxxxxxxx
503-777-7155
--------------------------------------------------------------------------
From: bksvol-discuss-bounce@xxxxxxxxxxxxx
[mailto:bksvol-discuss-bounce@xxxxxxxxxxxxx] On Behalf Of Pratik Patel
Sent: Tuesday, February 20, 2007 2:54 PM
To: bksvol-discuss@xxxxxxxxxxxxx
Subject: [bksvol-discuss] Re: HP SJ5590
Depending on how much you're planning to spend, you might want to
consider the Opticbook 3600 scanner from Plustek (www.plustek.com). It can be
a bit querky, but manageable. I don't recommend HP scanners at this time.
some of the cannons aren't too bad either. You can't beat the Plustek in speed.
Pratik
--------------------------------------------------------------------------
From: bksvol-discuss-bounce@xxxxxxxxxxxxx
[mailto:bksvol-discuss-bounce@xxxxxxxxxxxxx] On Behalf Of Barbara
Sent: Tuesday, February 20, 2007 5:43 PM
To: bksvol-discuss@xxxxxxxxxxxxx
Subject: [bksvol-discuss] Re: HP SJ5590
Kurzweil does not recommend HP scanners since you cannot control the
dark-light feature. I have an HP scanner and this is what I found. I bought an
Epson scanner which didn't work so I returned it and kept my HP scanner.
However, I am thinking about getting a Canon since the HP is not great. Also,
most HP scanners are not compatible with the Kurzweil software. You might want
to call Kurzweil, technical support and ask the technician before you spend
your money for an inadequate scanner.
Barbara
robert tweedy <roberttweedy@xxxxxxxxxxxxx> wrote:
This is the new scanner I'm thinking on getting. Here is my question
though. With the use on my left hand and limited use of my right, iS it easy to
use the ADF which comes with it and how do you use it with kurzweil? I saw flip
side in the menus and was wondering if you put the first page in and somehow
make it do the flip side somehow. If someone can give me the step by step
instructions, thanks in advance. I have a hard cover book here that I brought
of a book that is going to be redone because there are too manny errors in the
copy on bookshare.
For skype contact bobwichitaks
For msn contact info rt5117@xxxxxxx no emails.
Other related posts:
