[bksvol-discuss] Re: Compressing RTF: file too big for upload
- From: "Kaitlyn" <kaitlyn@xxxxxxxxxxxxx>
- To: <bksvol-discuss@xxxxxxxxxxxxx>
- Date: Sun, 31 Dec 2006 15:06:24 -0800
HI,
This has been somewhat addressed, but even with a book of around 600 pages,
when I convert it from KES to RTF the RTF file is only a little over a meg.
I am not sure what you are converting from but check your settings.
Katie Hill
You can learn a lot if you are humble enough to listen.
Lynn Lewis Warren
Email: Kaitlyn@xxxxxxxxxxxxx
503-777-7155
-----Original Message-----
From: bksvol-discuss-bounce@xxxxxxxxxxxxx
[mailto:bksvol-discuss-bounce@xxxxxxxxxxxxx] On Behalf Of Munawar Bijani
Sent: Saturday, December 30, 2006 10:54 AM
To: bksvol-discuss@xxxxxxxxxxxxx
Subject: [bksvol-discuss] Compressing RTF: file too big for upload
Hello All,
I used to submit books in text format because the RTF versions were too big
to upload -- 40 mb or so. By the time the upload was done, my session would
expire and I would be told to log in again and my book was not uploaded.
However, Bookshare no longer accepts text format. Is there any way to get my
RTF to be any ssmaller? I scanned it using the .TIF image format, in which
several pages are scanned into one image. This puts each scanned page on its
separate page when I OCR it with Omnipage. When I combine the three or so
RTF files into 1, (I can only scan 100 pages into each TIF file) the
resulting RTF is over 40 MB. Is there any way to strip the RTF of it's
graphical formatting -- color, alignment, Etc. while still keeping page
numbers? Thanks for any help.
Munawar A. Bijani
mailto:munawarb@xxxxxxxxx
To unsubscribe from this list send a blank Email to
bksvol-discuss-request@xxxxxxxxxxxxx
put the word 'unsubscribe' by itself in the subject line. To get a list of
available commands, put the word 'help' by itself in the subject line.
To unsubscribe from this list send a blank Email to
bksvol-discuss-request@xxxxxxxxxxxxx
put the word 'unsubscribe' by itself in the subject line. To get a list of
available commands, put the word 'help' by itself in the subject line.
Other related posts:
