[bksvol-discuss] Re: Bolded words in text

  • From: Denise Thompson <deniset@xxxxxxx>
  • To: bksvol-discuss@xxxxxxxxxxxxx
  • Date: Sun, 08 Nov 2009 15:44:48 -0800

My question is- does it make a difference in Daisy to have text in bold or italix. Does Daisy keep it? I've been changing the book to TN 23 and then putting the chapter in 16 because I though that's what we've talked about doing on this list before. I use regular for both. I was under the impression that Daisy didn't like bold or other types of text atributes. So now that we're all confused as to what to do. Someone needs to decide what BKS wants us to do. All of my proofed books that I've done this with have been approved by admin so apparently admin thinks regular text is ok. I want to do what is expected, but for it keeping changing makes it difficult for those of us doing proofing.


Denise


At 11:47 AM 11/7/2009, you wrote:
Monica, you make a good point; however, I am sure that the request to change the entire text of a submission to Times Roman 12 is in the manual.

Like you, I always change fonts in my chapter titles to a larger size, but luckily I have made a note to that effect when submitting the book. However, it would be very easy to do all the work you mention and not make a note.

I agree with the other Lori from a later message that I have changed the font in order to make the text more readable and also to reduce some very large fonts. In future, I will check the fonts of chapter titles before making a universal change.

Lori C.
.


----- Original Message ----- From: "Monica Willyard" <rhyami@xxxxxxxxx>
To: <bksvol-discuss@xxxxxxxxxxxxx>
Sent: Friday, November 06, 2009 10:56 PM
Subject: [bksvol-discuss] Re: Bolded words in text


Melissa and Lori, please, please don't do this as a principle on every book.
I don't think you realize that this could do damage to someone's submission.
When I submit books, I work very hard to fix the fonts so that my chapter
headings are detected more easily both by sighted users and the Bookshare
tools. Sighted readers use changes in the font face or font size to tell
when the chapter or scene changes in a book. The current book I'm scanning
uses the Arial font to indicate a chapter name and log entries when the
scene changes. The rest of the text is Times New Roman.

Furthermore, in many books I submit, the page numbers are at the bottom of
the page. Using a larger font for the chapter names or numbers tells the
Bookshare stripper that this is where a new chapter or part begins. If you
change the entire document to 12 point, you would unintentionally undo the
work I spend a couple of hours doing to ensure good daisy navigation for
everyone. Braille and blind speech users wouldn't notice. Our members with
learning disabilities would though, and I'm doing everything I can to make
their reading as easy and pleasurable as ours.

I hope what I'm saying doesn't sound like a lecture. It's not meant that
way. I'm pleading with you to learn about how fonts work and why they
matter. I used to do the same thing as you, changing mine to Times New Roman
as well. Then Judy and Valerie came into my life and opened my eyes and
heart to their needs. Since then I began paying attention to the fonts in my
scans before submitting them. Now I make sure the fonts for chapters are
correct as I strip headers in my books.

This isn't an absolute thing, and it's not a show-stopper in the grand
scheme of things. If you know for sure that the submitter hasn't done any
work with the fonts, changing the font probably won't matter. If your
screenreader won't speak the text in Word, you may have to change it to 12
point as a base. In that case, will you please consider taking the time to
enlarge the font for chapter headings to 14 or 16 point? You can do that
quickly by selecting the chapter name or number and pressing control right
bracket in Kurzweil or shift control right bracket in Word. It will increase
the point size each time you press the keystroke, and you should hear the
font size when it changes. The left bracket makes the font smaller, by the
way.

It does take extra time to do this. I freely admit that. If you are blind
like me, fonts mean very little since we can't see them. Still, I know I'd
want help if something was causing my Braille books to read badly, so I take
time to do it for others who need it.

Monica Willyard
"The best way to predict the future is to create it." -- Peter Drucker

-----Original Message-----
From: bksvol-discuss-bounce@xxxxxxxxxxxxx
[mailto:bksvol-discuss-bounce@xxxxxxxxxxxxx] On Behalf Of Melissa Smith
Sent: Friday, November 06, 2009 8:31 PM
To: bksvol-discuss@xxxxxxxxxxxxx
Subject: [bksvol-discuss] Re: Bolded words in text

I select the whole document, and set the font to Times New Roman, and 12
Point. I leave alone the box that has the style. This leaves any bold or
italicized text the way it is. I do this in every book I proof.

Melissa


To unsubscribe from this list send a blank Email to
bksvol-discuss-request@xxxxxxxxxxxxx
put the word 'unsubscribe' by itself in the subject line. To get a list of available commands, put the word 'help' by itself in the subject line.

To unsubscribe from this list send a blank Email to
bksvol-discuss-request@xxxxxxxxxxxxx
put the word 'unsubscribe' by itself in the subject line. To get a list of available commands, put the word 'help' by itself in the subject line.

Other related posts: