I am sure if we plan it correctly they could be made easily in some sort of
quantity.
My final rendition was a bit time consuming on the mill and lathe, but maybe
it could be tweaked to make it less machine shop intensive. I could host
the construction here at home.
The really critical part of the building is making the pivot holes very
equal in distance on each part.
Beevo
-----Original Message-----
From: az-observing-bounce@xxxxxxxxxxxxx
[mailto:az-observing-bounce@xxxxxxxxxxxxx]On Behalf Of Richard Harshaw
Sent: Tuesday, November 20, 2007 8:17 PM
To: az-observing@xxxxxxxxxxxxx
Subject: [AZ-Observing] Re: binocular viewing
Say, Beevo-- do you think this might stir enough interest in folks to have
an aluminum bino mount party some time? I'd be interested in making an
aluminum rig, as my oak one is not as smooth as I'd like at times.
Dick H
-----Original Message-----
From: az-observing-bounce@xxxxxxxxxxxxx
[mailto:az-observing-bounce@xxxxxxxxxxxxx] On Behalf Of Bill VanOrden
Sent: Tuesday, November 20, 2007 7:54 PM
To: az-observing@xxxxxxxxxxxxx
Subject: [AZ-Observing] Re: binocular viewing
Fran,
I have built several, mostly metal and most of those from Aluminum.
I would be glad to assist in your project.
Beevo
--
See message header for info on list archives or unsubscribing, and please
send personal replies to the author, not the list.
--
See message header for info on list archives or unsubscribing, and please
send personal replies to the author, not the list.
--
See message header for info on list archives or unsubscribing, and please
send personal replies to the author, not the list.
