[AZ-Observing] Re: Troubles on the Pole
- From: "Jimmy Ray" <jimmy_ray@xxxxxxx>
- To: <az-observing@xxxxxxxxxxxxx>
- Date: Sun, 25 Feb 2007 12:43:43 -0700
Ah Yes! I see "PEC" has a Record feature. Now that you have explained it,
I'll have to try it out.
If reading up is what is in the manual, well here you go... (I check the web
after bit and see what's out there..
"Cone" as defined in the manual:
"it calculates and compensates for "cone" error inherent in all German
equatorial mounts. Cone error is the inaccuracy that
results from the optical tube not being perpendicular
to the mounts declination axis."
-----Original Message-----
From: az-observing-bounce@xxxxxxxxxxxxx
[mailto:az-observing-bounce@xxxxxxxxxxxxx]On Behalf Of gene lucas
Sent: Sunday, February 25, 2007 12:33 PM
To: az-observing@xxxxxxxxxxxxx
Subject: [AZ-Observing] Re: Troubles on the Pole
PEC stands for "Periodic Error Correction". This is used to correct for
small imperfections in the worm/worm gear on the RA axis, which will
repeat during each worm rotation. The computer senses a point on the
shaft to set the beginning of the worm shaft rotation. The observer
turns on PEC "training", and keeps an object centered (in a crosshair
eyepiece) by pressing the tracking buttons during a full rotation cycle
of the worm shaft. The computer records the corrections, and then will
apply them in the same pattern (when PEC is turned on). If the observer
is not satisifed with the result, he can reset the "training" and record
a fresh pattern. Since the errors repeat the same way for each worm
shaft rotation, (typically about 2 to 4 minutes per rotation), the
"training" can be used for any subsequent night.
I am unfamiliar with the so-called "cone" correction, but that may
indeed be a way to compensate for non-orthoganality of the axes. Read
up on it and let us know.
(I am repeating this memo, as the stupid "net nanny" caught me with too
many lines showing!!)
Gene Lucas (17250)
Jimmy Ray wrote:
>"There is software that will "model" the errors and compensate for them.
TPoint from Cyanogen is such a package." Would this be what "PEC" or "Cone"
correction does on the Celestron CGE's? Jimmy Ray
>
>
>
--
See message header for info on list archives or unsubscribing, and please
send personal replies to the author, not the list.
--
See message header for info on list archives or unsubscribing, and please
send personal replies to the author, not the list.
- Follow-Ups:
- [AZ-Observing] Re: Troubles on the Pole
- From: gene lucas
- References:
- [AZ-Observing] Re: Troubles on the Pole
- From: gene lucas
Other related posts:
- » [AZ-Observing] Re: Troubles on the Pole
- » [AZ-Observing] Re: Troubles on the Pole
- » [AZ-Observing] Re: Troubles on the Pole
- » [AZ-Observing] Re: Troubles on the Pole
- [AZ-Observing] Re: Troubles on the Pole
- From: gene lucas
- [AZ-Observing] Re: Troubles on the Pole
- From: gene lucas