[atreus] Re: Issue white flashing to dvorak firmware

  • From: Evan Rowley <rowley.evan@xxxxxxxxx>
  • To: atreus@xxxxxxxxxxxxx
  • Date: Sat, 31 Dec 2016 22:14:54 -0500

Thanks Phil for your last message. The multidvorak hint helped me
switch to my favorite layout, whereby I cloned your TMK firmware repo,
built the standard dvorak, and uploaded the new image. It's working
well. My new year's resolution is to master the Atreus.

On Thu, Dec 29, 2016 at 3:05 PM, Phil Hagelberg <phil@xxxxxxxxxx> wrote:

Evan Rowley <rowley.evan@xxxxxxxxx> writes:

Sure, providing a SHA1 is not hard. It's the standard PCB
type-firmware from https://atreus.technomancy.us/downloads

I also tried re-downloading, but looks like it's the same file. Tried
the QWERTY one also, and it's definitely a different firmware.

OK, so it looks like I accidentally uploaded *multidvorak* instead of
dvorak for that file. The multidvorak layout defaults to a layout that
assumes the OS is configured for the dvorak layout; it mostly sends
qwerty keycodes except for some punctuation where that would get
translated into the wrong thing. However, you can switch it into
hardware dvorak mode where it will work when the OS is configured for
qwerty; just go to L2 (fn+esc) and press the "n" key, which is "b" in
dvorak; the third-row first key on the right half of the board.

I'll get that download corrected soon; in the mean time you can use the
multidvorak layout by first switching it to hardware dvorak mode.

Thanks for letting me know about the mistaken firmware, and sorry for
the confusion.

-Phil



-- 
 - EJR

Other related posts: