*The goggles, they do nothing for the eyes!*
On Fri, Jan 13, 2017 at 2:01 PM, Anthony Cesaroni <acesaroni@xxxxxxxxxxx>
wrote:
Thank you.
Anthony J. Cesaroni
President/CEO
Cesaroni Technology/Cesaroni Aerospace
http://www.cesaronitech.com/
(941) 360-3100 x101 <(941)%20360-3100> Sarasota
(905) 887-2370 x222 <(905)%20887-2370> Toronto
*From:* arocket-bounce@xxxxxxxxxxxxx [mailto:arocket-bounce@xxxxxxxxxxxxx]
*On Behalf Of *John Dom
*Sent:* Friday, January 13, 2017 3:46 PM
*To:* arocket@xxxxxxxxxxxxx
*Subject:* [AR] Re: arocket Digest V5 #9
Edward: FYI, Courier 36 letter font size is er, maybe unnecessarily
alarming. I respond here with Calibri 12 for a change.
John
*From:* arocket-bounce@xxxxxxxxxxxxx [mailto:arocket-bounce@xxxxxxxxxxxxx
<arocket-bounce@xxxxxxxxxxxxx>] *On Behalf Of *Edward Wranosky
*Sent:* vrijdag 13 januari 2017 20:15
*To:* arocket@xxxxxxxxxxxxx
*Subject:* [AR] Re: arocket Digest V5 #9
Rick,
I think he is talking about mixing aluminum in with a pure wax grain,
which is what I was talking about - mixing with vaseline.
If I'm adding anything to an HTPB/Powdered Wax grain I mix it into the
HTPB before adding wax. I don't think vaseline and HTPB would work that
well together.
Edward
On Fri, Jan 13, 2017 at 11:35 AM, Rick Dickinson <rtd@xxxxxxxxxxxx> wrote:
Isn't the issue that you don't want to heat the mixture, because doing so
would melt all of that nicely-powdered paraffin wax into a liquid mess? You
want liquid HTPB to get in and around the wax grains, supporting them in
its matrix as it cures. So, "solutions" that involve heating won't work
well.
Although, I suppose you could heat Vaseline and stir it into your powdered
aluminum, then add that to your HTPB, stirring well. Then, cool it down and
add your curative before mixing it with your wax granules. I'm pretty sure
you'd still need a vacuum step or two in there to get all the entrained air
out, though.
Might be worth a try just as a test, I suppose.
Cheers,
Rick Dickinson
On January 11, 2017 9:24:16 AM PST, Edward Wranosky <edwardcw@xxxxxxxxx>
wrote:
Instead of paraffin I'd be more inclined to mix it with something like
warm vaseline, then mix that in to the paraffin. Vaseline is more likely
to wet out the particles, especially if you pull a vacuum on the mixture.
Edward
On Wed, Jan 11, 2017 at 10:08 AM, Uwe Klein <uwe@xxxxxxxxxxxxxxxxxxx>
wrote:
Am 10.01.2017 um 20:38 schrieb (Redacted sender monsieurboo for DMARC):
... but the
paraffin doesn't really "wet" the powder so as the grain cools, the
powder separates out in streaks and I can't get a homogeneous grain.
Have you ever tried premixing al powder with a small amount of paraffin
first creating a paste? ( same issue (lumping) with mixing flour and water
which you can fix by creating a flour paste first.)
uwe
--
Sent from my Android device with K-9 Mail. Please excuse my brevity.
