Re: [ARMini-support] Slow Transfer of Large Files on ARMx6 with LanMan98

  • From: Brian Howlett <brian.groups@xxxxxxxxxxxxxxxxxx>
  • To: armini-support <armini-support@xxxxxxxxxxxxx>
  • Date: Tue, 07 Feb 2017 19:58:16 GMT

On 7 Feb, A Rawnsley wrote:

[snip]

PS, John has fixed a few more things in LanManFS (built-in) which is
reported to perform more consistantly than LM98.  We're trying to sort
a couple more things, and will release a new test-ROM at that point.

Michael BG who started this thread reported fast performance under
LanManFS (but with issues that we're fixing) but very slow on LM98.
As such, this may be of interest.

So, just as an experiment I did the following:

Copied an approximately 2GB video file from Drive D: on my PC 
(spinning rust) to Drive C: (SSD)
Time taken - 15 seconds

Copied the same file over LanMAN98 to HardDisc4 on the TiMachine
Time taken - 290 seconds

Copied the same file from HardDisc4 to HardDisc5
Time taken - 40 seconds

Copied the same file from HardDisc4 to my NAS
Time taken 110 seconds

The NAS is a Synology DS115J, and I was copying to the internal drive, 
rather than the USB external drives connected to it.

Usual caveats apply - not timed with a stop-watch, just counting in my 
head. Used Task Manager to increase the Wimp Slot for the Filer Action 
Window which didn't appear to noticeably improve things.

I don't generally through large files around my network, so I'm not 
really inconvenienced by any of this, but thought I'd let people see 
what happens here.
-- 
Brian Howlett
----------------------------------------------
All electronic components run on smoke.
If you let the smoke out, they stop working...
---
To alter your preferences or leave the group, 
visit //www.freelists.org/list/armini-support
List-related queries to info@xxxxxxxxxxxx

Other related posts: