[argyllcms] i1 pro not working ?

Hi there,

I'm new to Argyll, all I've done so far is measured an IT8.7 using Beta4 
spotread.

It was a couple of months ago, but I can't remember having any trouble using 
my i1 Pro after setting up the Udev rules for Debian Etch.

I've now downloaded Beta6 to try to do a scanner profile using the Eye-One Pro 
Scan Target 1.4, so I thought I'd better just check that the device was 
working, I did spotread -ii1 outfile.txt and all I get is the usage info and 
back to the command prompt, same problem with printread, I did
printread -n -a i1_RGB_Scan_1.4
as suggested in the Docs

and also tried
printread -n -a -ii1 i1_RGB_Scan_1.4

The results are the same for Beta4 and Beta6, nothing.

Am I missing something in the command?

If not, things that may have changed are:

I've used the i1 on Windows using the latest i1match software and drivers.

Updates to Etch???

        udevmonitor gives the following output

<when plugging the i1 in>
UEVENT[1190525159.213671] add@/devices/pci0000:00/0000:00:1d.2/usb3/3-2
UEVENT[1190525159.214686] 
add@/devices/pci0000:00/0000:00:1d.2/usb3/3-2/usbdev3.7_ep00
UDEV  [1190525159.216187] add@/devices/pci0000:00/0000:00:1d.2/usb3/3-2
UEVENT[1190525159.216947] 
add@/devices/pci0000:00/0000:00:1d.2/usb3/3-2/3-2:1.0
UEVENT[1190525159.216995] 
add@/devices/pci0000:00/0000:00:1d.2/usb3/3-2/3-2:1.0/usbdev3.7_ep01
UEVENT[1190525159.217010] 
add@/devices/pci0000:00/0000:00:1d.2/usb3/3-2/3-2:1.0/usbdev3.7_ep82
UEVENT[1190525159.217022] 
add@/devices/pci0000:00/0000:00:1d.2/usb3/3-2/3-2:1.0/usbdev3.7_ep03
UEVENT[1190525159.217034] 
add@/devices/pci0000:00/0000:00:1d.2/usb3/3-2/3-2:1.0/usbdev3.7_ep84
UEVENT[1190525159.217045] add@/class/usb_device/usbdev3.7
UDEV  [1190525159.319568] 
add@/devices/pci0000:00/0000:00:1d.2/usb3/3-2/usbdev3.7_ep00
UDEV  [1190525159.322182] 
add@/devices/pci0000:00/0000:00:1d.2/usb3/3-2/3-2:1.0
UDEV  [1190525159.429322] 
add@/devices/pci0000:00/0000:00:1d.2/usb3/3-2/3-2:1.0/usbdev3.7_ep01
UDEV  [1190525159.437243] 
add@/devices/pci0000:00/0000:00:1d.2/usb3/3-2/3-2:1.0/usbdev3.7_ep82
UDEV  [1190525159.446483] 
add@/devices/pci0000:00/0000:00:1d.2/usb3/3-2/3-2:1.0/usbdev3.7_ep03
UDEV  [1190525159.454206] 
add@/devices/pci0000:00/0000:00:1d.2/usb3/3-2/3-2:1.0/usbdev3.7_ep84
UDEV  [1190525159.516154] add@/class/usb_device/usbdev3.7
</when plugging the i1 in>

<when unplugging the i1>
UEVENT[1190525231.630373] 
remove@/devices/pci0000:00/0000:00:1d.2/usb3/3-2/3-2:1.0/usbdev3.7_ep01
UEVENT[1190525231.630435] 
remove@/devices/pci0000:00/0000:00:1d.2/usb3/3-2/3-2:1.0/usbdev3.7_ep82
UEVENT[1190525231.630451] 
remove@/devices/pci0000:00/0000:00:1d.2/usb3/3-2/3-2:1.0/usbdev3.7_ep03
UEVENT[1190525231.630464] 
remove@/devices/pci0000:00/0000:00:1d.2/usb3/3-2/3-2:1.0/usbdev3.7_ep84
UEVENT[1190525231.630477] 
remove@/devices/pci0000:00/0000:00:1d.2/usb3/3-2/3-2:1.0
UEVENT[1190525231.630490] remove@/class/usb_device/usbdev3.7
UEVENT[1190525231.630502] 
remove@/devices/pci0000:00/0000:00:1d.2/usb3/3-2/usbdev3.7_ep00
UEVENT[1190525231.630513] remove@/devices/pci0000:00/0000:00:1d.2/usb3/3-2
UDEV  [1190525231.635645] 
remove@/devices/pci0000:00/0000:00:1d.2/usb3/3-2/3-2:1.0/usbdev3.7_ep01
UDEV  [1190525231.638142] 
remove@/devices/pci0000:00/0000:00:1d.2/usb3/3-2/3-2:1.0/usbdev3.7_ep82
UDEV  [1190525231.640597] 
remove@/devices/pci0000:00/0000:00:1d.2/usb3/3-2/3-2:1.0/usbdev3.7_ep03
UDEV  [1190525231.643032] 
remove@/devices/pci0000:00/0000:00:1d.2/usb3/3-2/3-2:1.0/usbdev3.7_ep84
UDEV  [1190525231.645533] remove@/class/usb_device/usbdev3.7
UDEV  [1190525231.649720] 
remove@/devices/pci0000:00/0000:00:1d.2/usb3/3-2/usbdev3.7_ep00
UDEV  [1190525231.652392] 
remove@/devices/pci0000:00/0000:00:1d.2/usb3/3-2/3-2:1.0
UDEV  [1190525231.656075] remove@/devices/pci0000:00/0000:00:1d.2/usb3/3-2
</when unplugging the i1>



thanks for any help

Regards Andreas

Other related posts: