[argyllcms] Re: dispcalGUI v0.2.5b rc1

Florian,

2009/4/28 Florian Höch <lists+argyllcms@xxxxxxxxx>:
> Okay, so it's failing really early, maybe even before the embedded python
> interpreter starts to run. Not much I can do in that case, I fear. It might
> be easiest to just use the source after satisfying the Python and wxPython
> dependency (a side note, you can use the install script to compile and
> install from source, but it should be done using sudo, otherwise it will try
> to use ~/.local as prefix which Python will likely complain about).

I'll try it later.

> I uploaded a new
> installer, which contains an exe that is not compressed as much:
>
> http://dispcalgui.hoech.net/snapshot/20090424/dispcalGUI-0.2.5b-Setup.exe

Much better. Now it's down to about 4 seconds.

I also tried the Mac version. Everything worked, but I had to
calibrate the eye-one pro between calibration and profiling.

Martin Weberg

Other related posts: