Le 20/8/2008, "Frédéric" <frederic.mantegazza@xxxxxxxxxxx> a écrit: >Ok, here some comments... > >1) Our first problem was to be able to display patches on the screen2, >but using the LUT of screen1. This is because the nvidia driver does not >have a LUT per screen. Graeme added an option which allow that (using -d >2,1). That's where python is nice: it took use less than a minute to >make a (hugly) patch in the source ;) > >To correct that in a nice way, you just need to add a second combobox >with all screens entries, like for choosing the screen where patches go, >but for choosing the screen to use for the LUT. > >2) Then, some requested features: > >- add a full-screen checkbox to automatically extend the patch to the >entire screen (-p param) >- add a 'install last calibration' button, to avoid the need to open >teh file selector >- let the GUI open during measures, and put Argyll feedback in the GUI >(this may require some little moifications of Argyll to have a better >interaction between it and the GUI). >- add all stuff to generate the .ti1 file from the GUI (already planned) >- add the possibility to generate the profile (using colprof) from the >ti3, with different parameters. Any news about this nice software? Did you make some modifications since the 0.1 beta? -- Frédéric