[argyllcms] Re: [argyllcms]

Florian,

I will do this, following your advice, but my Installation Instruction reads
differently:

From Installing_MSWindows.html (v1.1.1):

"**If you are using a USB connected instrument**, then suitable USB drivers
may need to be installed.

        NOTE that you generally can't install USB drivers on Vista
64/Windows 7 
       64 bit due to Microsoft's driver code signing requirements."
        [...]

Frech Installation of USB drivers:
----------------------------------

**If you currently don't have any applications that talk to your instrument
using USB**, then it is relatively simple to use the drivers provided with
Argyll..."


And the latter was my case. But, I'm confused due to your insistance, so
that's why I will do anyway as you advice.

regards

nino



-----Original Message-----
From: argyllcms-bounce@xxxxxxxxxxxxx [mailto:argyllcms-bounce@xxxxxxxxxxxxx]
On Behalf Of Florian Höch
Sent: Monday, June 21, 2010 12:11 AM
To: argyllcms@xxxxxxxxxxxxx
Subject: [argyllcms] Re: [argyllcms]

 From Installing_MSWindows.html (v1.1.1):

"NOTE that you generally can't install USB drivers on Vista 64/Windows 7 
64 bit due to Microsoft's driver code signing requirements."

So, I think you either need to put the system in test mode and self-sign 
the drivers before installation (that's what I did, works nicely) or 
(not so nice) press F8 on each boot.

Regards

Am 20.06.2010 22:24, schrieb nino@xxxxxxxx:
>
> Florian,
>
> I didn't have to do the F8A workaround, because I did a fresh install of
the
> Argyl LibUSB driver. As detailed in the Argyll installation instructions,
it
> is not necesary to do the driver signing/test mode/F8 in Win7 when freshly
> installing. There was no problem. It worked as described in the
Installation
> Instructions. Also, as mentioned the driver Argyll LibUSB driver shows up
in
> the Device Manager.
>
> -----Original Message-----
> From: argyllcms-bounce@xxxxxxxxxxxxx
[mailto:argyllcms-bounce@xxxxxxxxxxxxx]
> On Behalf Of Florian Höch
> Sent: Sunday, June 20, 2010 11:16 PM
> To: argyllcms@xxxxxxxxxxxxx
> Subject: [argyllcms] Re: [argyllcms]
>
> Hi,
>
> have you followed the driver signing/test mode/F8 boot procedure that is
> necessary for the Argyll Win7 64 drivers like outlined on this list a
> while ago? I assume so, as you were able to install the driver. Just
> checking.
>
> Am 20.06.2010 21:24, schrieb nino@xxxxxxxx:
>> Yes, Roger, I double checked: DTP94 is linked to Argyll LibUSB driver.
>> When I try to run dispcal for example I get "Error - icoms -
>> set_ser_port: port number out of range!"
>>
>> nino
>>
>> *From:* argyllcms-bounce@xxxxxxxxxxxxx
>> [mailto:argyllcms-bounce@xxxxxxxxxxxxx] *On Behalf Of *Roger Breton
>> *Sent:* Sunday, June 20, 2010 10:18 PM
>> *To:* argyllcms@xxxxxxxxxxxxx
>> *Subject:* [argyllcms] Re: [argyllcms]
>>
>> Whew? Windows 7 64 bit giving you USB issues? You?re sure you have the
>> instruments linked to the Argyll LibUSB driver, and not X-Rite?s? Did
>> you look into Computer ? Manage ? Devices?
>>
>> Roger
>>
>> *From:* argyllcms-bounce@xxxxxxxxxxxxx
>> [mailto:argyllcms-bounce@xxxxxxxxxxxxx] *On Behalf Of *nino@xxxxxxxx
>> *Sent:* 20 juin 2010 09:23
>> *To:* argyllcms@xxxxxxxxxxxxx
>> *Subject:* [argyllcms]
>>
>> Hi,
>>
>> I am trying to run Argyll, but the communication port of my device, a
>> DTP94b, is not found when I try dispcal (Under -c listno I get ** No
>> ports found **). I uninstalled the device completely before installing
>> it from scratch with the Argyll driver for win7 64bit. Didn't help.
>>
>> thanks in advance for any help
>>
>> nino
>

-- 
Florian Höch
http://hoech.net



Other related posts: