[argyllcms] Working with a Unique Ink Configuration

  • From: Terry Ritz <t.ritz@xxxxxxxxxxxxx>
  • To: <argyllcms@xxxxxxxxxxxxx>
  • Date: Sun, 28 Mar 2010 20:02:42 -0600

At some point I might like to experiment with changing out Epson¹s K, LK,
and LLK in my 3800 and instead using Jon Cone¹s Selenium inks 1, 4 and 5
(Piezography ­ Inkjetmall.com). These are part of a high quality, 7 ink
dilution, dedicated black and white ink set. The intent would be to improve
printing in neutral areas, as Selenium is already very close to neutral and
would require little or no colour mixed in to produce neutral gray. A colour
RIP would be ideal for this, but I¹m wondering if Argyll could facilitate
this in some manner.

Will there be any problem creating a printer profile for this ink
configuration (Mac printing via Epson driver).

Would there be any way to control / limit the amount of colour ink used to
print in neutral or near-neutral areas?

Are there other Argyll features that might be helpful?

Thanks.

Terry.

Other related posts: