[argyllcms] Re: Spyder

On vendredi 07 décembre 2007, Graeme Gill wrote:

> Frédéric Mantegazza wrote:

> > Is it supported in the beta 7? And is the Spyder (first version) will
> > be supported as well? If I try to use dispcal, I get:
> >
> > BTW, what is a 'PLD pattern'?
>
> Please see the documentation:
>
> <http://www.argyllcms.com/doc7/ArgyllDoc.html>
>
> Look for "Spyder 2", and you will notice a link in
>   "(Note that the user must supply firmware)"
> to <http://www.argyllcms.com/doc7/spyd2en.html>
> which explains this.

Ok, I launched spyd2en, but it failed: no CVSpyder.dll file was found. All 
files I have on CDROM looking like this one are:

/media/cdrom/driver
/media/cdrom/driver/CRT-LCD Spyder
/media/cdrom/driver/CRT-LCD Spyder/cvspydr2.cat
/media/cdrom/driver/CRT-LCD Spyder/cvspydr2.inf
/media/cdrom/driver/CRT-LCD Spyder/cvspydr2.sys

As I said, this is not the spyder 2; but dispcal says so:

    icoms: About to open USB port 'usb:/bus0/dev6 (ColorVision Spyder2)'

lsusb gives:

    Bus 003 Device 006: ID 085c:0200 ColorVision, Inc. Monitor Spyder

Does it mean that this one is not supported?

-- 
   Frédéric

   http://www.gbiloba.org

Other related posts: