[argyllcms] Re: Spectroscan


instType: About to init Serial I/O
instType: Trying different baud rates (20000 msec to go)
icoms: About to set port characteristics:
      Port = 2
      Flow control = 1
      Baud Rate = 7
      Parity = 1
      Stop bits = 1
      Word length = 4
icoms: About to open port 'COM3'
icoms: serial port characteristics set ok

icoms: Write_Read called with ';D024^M^J'
icoms: About to write ';D024^M^J' ICOM err 0x0
icoms: About to return read ':D18310^M^J' ICOM err 0x0
icoms: Write_Read Write_Read success, returning ':D18310^M^J'
instType: Got coms with instrument

icoms: Write_Read called with ';D030^M^J'
icoms: About to write ';D030^M^J' ICOM err 0x0
icoms: About to return read ':D1905370656374726F5363616E54000000000000^M^J' ICOM 
err 0x0
icoms: Write_Read Write_Read success, returning ':D1905370656374726F5363616E5400 
0000000000^M^J'
instType: Instrument type is 'GretagMacbeth SpectroScanT'
icoms: About to set port characteristics:
      Port = 2
      Flow control = 1
      Baud Rate = 7
      Parity = 1
      Stop bits = 1
      Word length = 4
icoms: serial port characteristics set ok

icoms: Write_Read called with ';D024^M^J'
icoms: About to write ';D024^M^J' ICOM err 0x0
icoms: About to return read ':D18310^M^J' ICOM err 0x0
icoms: Write_Read Write_Read success, returning ':D18310^M^J'

icoms: Write_Read called with ';D010^M^J'
icoms: About to write ';D010^M^J' ICOM err 0x0
icoms: About to return read ':D18000^M^J' ICOM err 0x0
icoms: Write_Read Write_Read success, returning ':D18000^M^J'

icoms: Write_Read called with ';D02102^M^J'
icoms: About to write ';D02102^M^J' ICOM err 0x0
icoms: About to return read ':D18000^M^J' ICOM err 0x0
icoms: Write_Read Write_Read success, returning ':D18000^M^J'

icoms: Write_Read called with ';D02007^M^J'
icoms: About to write ';D02007^M^J' ICOM err 0x0
icoms: About to return read ':D18000^M^J' ICOM err 0x0
icoms: Write_Read Write_Read success, returning ':D18000^M^J'
icoms: About to set port characteristics:
      Port = 2
      Flow control = 3
      Baud Rate = 7
      Parity = 1
      Stop bits = 1
      Word length = 4
icoms: serial port characteristics set ok

icoms: Write_Read called with ';D00B^M^J'
icoms: About to write ';D00B^M^J' ICOM err 0x0
icoms: About to return read ':D18000^M^J' ICOM err 0x0
icoms: Write_Read Write_Read success, returning ':D18000^M^J'

icoms: Write_Read called with ';D030^M^J'
icoms: About to write ';D030^M^J' ICOM err 0x0
icoms: About to return read ':D1905370656374726F5363616E54000000000000^M^J' ICOM 
err 0x0
icoms: Write_Read Write_Read success, returning ':D1905370656374726F5363616E5400 
0000000000^M^J'

icoms: Write_Read called with ';2B^M^J'
icoms: About to write ';2B^M^J' ICOM err 0x0
icoms: About to return read ':315370656374726F6C696E6F20386D6D0000007AC38500D107 
01000C0000000000027C0124000A00^M^J' ICOM err 0x0
icoms: Write_Read Write_Read success, returning ':315370656374726F6C696E6F20386D 
6D0000007AC38500D10701000C0000000000027C0124000A00^M^J'
Failed to initialise communications with instrument
or wrong instrument or bad configuration!
('Not expected instrument model' + 'No device error')
icoms: delete called
icoms: closing port


Hope this makes sence

Best regards
Amin
----- Original Message ----- From: "Graeme Gill" <graeme@xxxxxxxxxxxxx> 
To: <argyllcms@xxxxxxxxxxxxx>
Sent: Tuesday, March 18, 2008 12:27 AM
Subject: [argyllcms] Re: Spectroscan



Amin Gharehchaie wrote:
Does anyone use Argyll with an Spectroscan that is connected to a computer with an Keyspan USB adapter? 

I've done so on occasions, using a USA19H adapter to OS X, but I've
also used this adapter with MSWindows and Linux with other serial
instruments without any trouble.


As I get this error when I try

Failed to initialise communications with instrument
or wrong instrument or bad configuration!
('Not expected instrument model' + 'No device error')


What trace information do you get when you use -D ?

Graeme Gill.

Other related posts: