[argyllcms] Re: Small target for CMYK profile verification
- From: Graeme Gill <graeme@xxxxxxxxxxxxx>
- To: argyllcms@xxxxxxxxxxxxx
- Date: Fri, 25 May 2012 10:35:29 +1000
Ivan Tsyba wrote:
> Is there are advices how test values must be generated for that case? Is so
> small target generated
> by targen for characterisation will give needed results?
Test strips typically contain a small set of wedges for each colorant (ie.
0%, 25%, 50%, 100%), + some composite black (ie. CMY and CMYK) test wedges
to judge grey balance.
You might be able to use targen for much of this, and/or add values
to the .ti1 in by hand. You can use icclu to get the rough XYZ values in the
file.
Graeme Gill.
Other related posts:
