[argyllcms] Re: RGB Printer profiling and ColorSavvy CM2C

Alastair wrote:
> Sadly not - it just has an eighth-inch circle "eye" that has to be 
> placed by hand on each patch.  I think I can make this process a fair 
> bit easier by printing some cross-hairs on a piece of OHP film and 
> mounting it underneath the device, with a hole for the eye in the centre.

What I do is simply make the patches large enough so that it's very easy
to place the instrument rapidly without risk of being too far over to the
edge. (and 1.3cm square seems to be about right, FWIW)

Greg.

Other related posts: