[argyllcms] Re: Profiling with a known gamma shaper

Pascal de Bruijn wrote:
> I basically want to predefine the gamma shaper before the XYZ matrix
> is calculated...
>
> At least, I'd like to try, and see what the results are...

Mathematically this is of course possible, but I'm not aware how one
could do that with Argyll out of the box, w/o making changes to the
code. Possibly you can outwit colprof to some extent by adding a huge
number of data points along the gray axis (R=G=B) to the .ti3 file,
which follow your predefined RGB to Y tone mapping. Then I guess you'll
have a good chance that these points will dominate the shape of the TRC
established by colprof -aS [make sure that all these added neutral
points have the same chromaticity in order that they do not dominate the
matrix as well].

Regards,
Gerhard

Other related posts: