[argyllcms] Problems using iOne

Hi Greame,

I tried using the iOne Rev.A with dispcal on the following setups:

1.      Powerbook G4 with OS X 10.4.8
2.      Powermac G5 with OS X 10.4.9

With both setups I got the same errors.

Error 1:
dispcal -v -m -yl -t5500 -gs -k1.0 -e -p 0.5,0.5,1.5 -K myLCD
Setting up the instrument
Instrument Type:   Eye-One Pro
Serial Number:     121451
Firmware version:  202
CPLD version:      2
Date manufactured: 25-5-2005
U.V. filter ?:     No
Measure Ambient ?: Yes
Tot. Measurement Count:           850
Remission Spot Count:             791
Remission Scan Count:             35
Date of last Remission spot cal:  Mon Mar 19 05:13:17 2007
Remission Spot Count at last cal: 647
Total lamp usage:                 942.465820
Place the instrument on it's reflective white reference Serial no. 121451, 
and then hit any key to continue,
or hit Esc, ^C or Q to abort:
Calibration complete
Setting up the instrument
Instrument Type:   Eye-One Pro
Serial Number:     121451
Firmware version:  202
CPLD version:      2
Date manufactured: 25-5-2005
U.V. filter ?:     No
Measure Ambient ?: Yes
Tot. Measurement Count:           850
Remission Spot Count:             791
Remission Scan Count:             35
Date of last Remission spot cal:  Mon Mar 19 05:13:17 2007
Remission Spot Count at last cal: 647
Total lamp usage:                 942.465820
Place the instrument on it's reflective white reference Serial no. 121451, 
and then hit any key to continue,
or hit Esc, ^C or Q to abort:Bus error

Solution:
The Bus error is going away when I don't set the -K

Error 2:
dispcal -v -m -yl -t5500 -gs -k1.0 -e -p 0.5,0.5,1.5 myLCD
Setting up the instrument
Instrument Type:   Eye-One Pro
Serial Number:     121451
Firmware version:  202
CPLD version:      2
Date manufactured: 25-5-2005
U.V. filter ?:     No
Measure Ambient ?: Yes
Tot. Measurement Count:           850
Remission Spot Count:             791
Remission Scan Count:             35
Date of last Remission spot cal:  Mon Mar 19 05:13:17 2007
Remission Spot Count at last cal: 647
Total lamp usage:                 942.465820
Place the instrument on it's reflective white reference Serial no. 121451, 
and then hit any key to continue,
or hit Esc, ^C or Q to abort:
Calibration complete

Place instrument on test window.
Hit Esc, ^C or Q to give up, any other key to continue:
Display type is LCD
Target white = 5500.000000 degrees kelvin Daylight spectrum
Target brightness = native brightness
Target gamma = sRGB curve
Commencing device calibration
patch 2 of 6
Sample read failed due to communication problem.
Hit Esc, ^C or Q to give up, any other key to retry:
The instrument can be removed from the screen.

Solution:
No

Using the DTP94 erverything is working fine.

I hope this helps a little bit.
If I can do anything to give you more information to help you, please let me know. 

Should I do the same test with spotread, printread and dispread?

With deap respect for your public work and best regards,
Clemens Beisch

Other related posts: