[argyllcms] Re: Gutenprint and ink limits.

Am 09.08.07, 15:07 +0200 schrieb Lars Tore Gustavsen:

> I printed a cmykramp from cinepaint and used the unprint tool on this
 
> It looks like the strip with only a K value, the lower one, is printed
> with black only inc. In the patch at right there is also something
> that I guess is light black ink.
 
A additional ramp with Cmy and K involved would be a useful thing in this 
set.
 
> http://www.mulebakken.net/div/cmykramp-unprint.jpg
> Epson R2400 printed with direct cmyk print cinepaint.

Ok, then perhaps try to use "raw" instead of "uncorrected". You can later 
limit to a useful ink density in the driver.

kind regards
Kai-Uwe Behrmann
--
developing for colour management 
www.behrmann.name + www.oyranos.org + www.cinepaint.org

Other related posts: