[argyllcms] Re: Dispread segmentation fault

Tried the new binaries v1.0.2. I still get segmentation fault using
dispread.

MacPPC 10.4, Eye-One rev D

dispread -v -yl -D test2

Found 1 screens
Number of patches = 17
Setting up the instrument
i1pro: About to init coms
i1pro: About to init USB
icoms: About to set usb port characteristics
icoms: About to open the USB port
icoms: USB port needs opening
icoms: About to open USB port 'usb:/bus11/dev0 (GretagMacbeth i1 Pro)'
icoms: USB port is now open
icoms: Clearing any USB errors
icoms: usb port characteristics set ok
i1pro: init coms has suceeded
i1pro: About to init instrument

i1pro: Instrument reset with mask 0x1f
Reset complete, ICOM err 0x0

i1pro: GetMisc
GetMisc returns 503, 0x148b, 0xfa00, 0x01, 0x00 ICOM err 0x0
Firmware rev = 503

i1pro: Read EEProm address 0x0 size 0x2000
Read 0x2000 bytes, ICOM err 0x0
CPLD rev = 999

i1pro: GetMisc
GetMisc returns 503, 0x148b, 0xfa00, 0x01, 0x00 ICOM err 0x0

i1pro: Instrument reset with mask 0x1f
Reset complete, ICOM err 0x0

i1pro: GetMeasureParams
MeasureParam returns 14706, 22, 2, 0x06 ICOM err 0x0
Instrument Type:   Eye-One Pro
Serial Number:     313906
Firmware version:  503
CPLD version:      999
Date manufactured: 19-6-2007
U.V. filter ?:     No
Measure Ambient ?: Yes
Tot. Measurement Count:           9330
Remission Spot Count:             820
Remission Scan Count:             1092
Date of last Remission spot cal:  Thu Jul 31 08:54:18 2008
Remission Spot Count at last cal: 682
Total lamp usage:                 3697.360840
 Display size = 430.000000 x 320.000000 mm
dispwin_set_color called
dispwin_get_ramdac called
dispwin_get_ramdac called
inst_handle_calibrate called
About to call calibrate at top of loop
Place cap on the instrument, or place in on a dark surface,
or place on the white calibration reference,
 and then hit any key to continue,
 or hit Esc, ^C or Q to abort:
About to call calibrate at top of loop

i1pro: Set measurement clock mode 1
Set measuremnt clock mode done, ICOM err 0x0

i1pro: GetMeasureClockMode
MeasureClockMode returns 2, 1, (128), 136, 68 0x0 ICOM err 0x0

i1pro: SetMeasureParam 14706, 22, 2, 0x06
SetMeasureParams got ICOM err 0x0

i1pro: Triggering measurement after 10msec delay
Scheduled triggering OK

i1pro: Read measurement results inummeas 2, scanflag 0, address 0x2800a00
bsize 0x200
Read 2 readings, ICOM err 0x0
(Trig & rd times 1 -10 2036 -10)
Execution time of dark calib time 1.000008 sec = 2041 msec

i1pro: Set measurement clock mode 1
Set measuremnt clock mode done, ICOM err 0x0

i1pro: GetMeasureClockMode
MeasureClockMode returns 2, 1, (128), 136, 68 0x0 ICOM err 0x0

i1pro: SetMeasureParam 29412, 22, 1, 0x06
SetMeasureParams got ICOM err 0x0

i1pro: Triggering measurement after 10msec delay
Scheduled triggering OK

i1pro: Read measurement results inummeas 1, scanflag 0, address 0x569690
bsize 0x100
Read 1 readings, ICOM err 0x0
(Trig & rd times 1 -11 2051 -11)
Execution time of 2nd dark calib time 1.000008 sec = 2054 msec
Calibration complete
inst_handle_calibrate done 0x0

Place instrument on test window.
Hit Esc, ^C or Q to give up, any other key to continue:
dispwin_set_color called

i1pro: Set measurement clock mode 1
Set measuremnt clock mode done, ICOM err 0x0

i1pro: GetMeasureClockMode
MeasureClockMode returns 2, 1, (128), 136, 68 0x0 ICOM err 0x0

i1pro: SetMeasureParam 14706, 22, 2, 0x06
SetMeasureParams got ICOM err 0x0

i1pro: Triggering measurement after 10msec delay
Scheduled triggering OK

i1pro: Read measurement results inummeas 2, scanflag 0, address 0x2800a00
bsize 0x200
Read 2 readings, ICOM err 0x0
(Trig & rd times 1 -12 2033 -12)
patch 1 of 17About to read patch 0
dispwin_set_color called
Taking 1 measurments in Emission mode called

i1pro: SetMeasureParam 14706, 22, 2, 0x06
SetMeasureParams got ICOM err 0x0

i1pro: Triggering measurement after 10msec delay
Scheduled triggering OK

i1pro: Read measurement results inummeas 2, scanflag 0, address 0x2800a00
bsize 0x200
Read 2 readings, ICOM err 0x0
(Trig & rd times 1 -11 2034 -11)
got reading abs. 154.536342 161.982669 126.009488, transfering to col
on to next reading
patch 2 of 17About to read patch 1
dispwin_set_color called
Taking 1 measurments in Emission mode called

i1pro: SetMeasureParam 14706, 22, 2, 0x06
SetMeasureParams got ICOM err 0x0

i1pro: Triggering measurement after 10msec delay
Scheduled triggering OK

i1pro: Read measurement results inummeas 2, scanflag 0, address 0x2800a00
bsize 0x200
Read 2 readings, ICOM err 0x0
(Trig & rd times 1 -11 2033 -11)
got reading abs. 0.501238 0.469477 0.680301, transfering to col
on to next reading
patch 3 of 17About to read patch 2
dispwin_set_color called
Taking 1 measurments in Emission mode called

i1pro: SetMeasureParam 14706, 22, 2, 0x06
SetMeasureParams got ICOM err 0x0

i1pro: Triggering measurement after 10msec delay
Scheduled triggering OK

i1pro: Read measurement results inummeas 2, scanflag 0, address 0x2800a00
bsize 0x200
Read 2 readings, ICOM err 0x0
(Trig & rd times 1 -11 2031 -11)
got reading abs. 4.054149 2.281148 0.747639, transfering to col
on to next reading
patch 4 of 17About to read patch 3
dispwin_set_color called
Taking 1 measurments in Emission mode called

i1pro: SetMeasureParam 14706, 22, 2, 0x06
SetMeasureParams got ICOM err 0x0

i1pro: Triggering measurement after 10msec delay
Scheduled triggering OK

i1pro: Read measurement results inummeas 2, scanflag 0, address 0x2800a00
bsize 0x200
Read 2 readings, ICOM err 0x0
(Trig & rd times 0 -10 2033 -10)
got reading abs. 15.046661 8.013130 1.048043, transfering to col
on to next reading
patch 5 of 17About to read patch 4
dispwin_set_color called
Taking 1 measurments in Emission mode called

i1pro: SetMeasureParam 14706, 22, 2, 0x06
SetMeasureParams got ICOM err 0x0

i1pro: Triggering measurement after 10msec delay
Scheduled triggering OK

i1pro: Read measurement results inummeas 2, scanflag 0, address 0x2800a00
bsize 0x200
Read 2 readings, ICOM err 0x0
(Trig & rd times 1 -12 2033 -12)
got reading abs. 39.246532 20.527022 1.674463, transfering to col
on to next reading
patch 6 of 17About to read patch 5
dispwin_set_color called
Taking 1 measurments in Emission mode called

i1pro: SetMeasureParam 14706, 22, 2, 0x06
SetMeasureParams got ICOM err 0x0

i1pro: Triggering measurement after 10msec delay
Scheduled triggering OK

i1pro: Read measurement results inummeas 2, scanflag 0, address 0x2800a00
bsize 0x200
Read 2 readings, ICOM err 0x0
(Trig & rd times 1 -11 2032 -11)
got reading abs. 83.254688 43.339165 2.823648, transfering to col
on to next reading
patch 7 of 17About to read patch 6
dispwin_set_color called
Taking 1 measurments in Emission mode called

i1pro: SetMeasureParam 14706, 22, 2, 0x06
SetMeasureParams got ICOM err 0x0

i1pro: Triggering measurement after 10msec delay
Scheduled triggering OK

i1pro: Read measurement results inummeas 2, scanflag 0, address 0x2800a00
bsize 0x200
Read 2 readings, ICOM err 0x0
(Trig & rd times 0 -10 2034 -10)
got reading abs. 2.673636 5.105834 1.288597, transfering to col
on to next reading
patch 8 of 17About to read patch 7
dispwin_set_color called
Taking 1 measurments in Emission mode called

i1pro: SetMeasureParam 14706, 22, 2, 0x06
SetMeasureParams got ICOM err 0x0

i1pro: Triggering measurement after 10msec delay
Scheduled triggering OK

i1pro: Read measurement results inummeas 2, scanflag 0, address 0x2800a00
bsize 0x200
Read 2 readings, ICOM err 0x0
(Trig & rd times 1 -11 2034 -11)
got reading abs. 9.468888 19.350235 3.378886, transfering to col
on to next reading
patch 9 of 17About to read patch 8
dispwin_set_color called
Taking 1 measurments in Emission mode called

i1pro: SetMeasureParam 14706, 22, 2, 0x06
SetMeasureParams got ICOM err 0x0

i1pro: Triggering measurement after 10msec delay
Scheduled triggering OK

i1pro: Read measurement results inummeas 2, scanflag 0, address 0x2800a00
bsize 0x200
Read 2 readings, ICOM err 0x0
(Trig & rd times 0 -10 2033 -10)
got reading abs. 24.447749 50.655352 7.967905, transfering to col
on to next reading
patch 10 of 17About to read patch 9
dispwin_set_color called
Taking 1 measurments in Emission mode called

i1pro: SetMeasureParam 14706, 22, 2, 0x06
SetMeasureParams got ICOM err 0x0

i1pro: Triggering measurement after 10msec delay
Scheduled triggering OK

i1pro: Read measurement results inummeas 2, scanflag 0, address 0x2800a00
bsize 0x200
Read 2 readings, ICOM err 0x0
(Trig & rd times 1 -11 2034 -11)
got reading abs. 51.572611 107.225310 16.181256, transfering to col
on to next reading
patch 11 of 17About to read patch 10
dispwin_set_color called
Taking 1 measurments in Emission mode called

i1pro: SetMeasureParam 14706, 22, 2, 0x06
SetMeasureParams got ICOM err 0x0

i1pro: Triggering measurement after 10msec delay
Scheduled triggering OK

i1pro: Read measurement results inummeas 2, scanflag 0, address 0x2800a00
bsize 0x200
Read 2 readings, ICOM err 0x0
(Trig & rd times 1 -12 2034 -12)
got reading abs. 1.211425 0.872427 4.912769, transfering to col
on to next reading
patch 12 of 17About to read patch 11
dispwin_set_color called
Taking 1 measurments in Emission mode called

i1pro: SetMeasureParam 14706, 22, 2, 0x06
SetMeasureParams got ICOM err 0x0

i1pro: Triggering measurement after 10msec delay
Scheduled triggering OK

i1pro: Read measurement results inummeas 2, scanflag 0, address 0x2800a00
bsize 0x200
Read 2 readings, ICOM err 0x0
(Trig & rd times 2 -12 2035 -12)
got reading abs. 3.694501 2.283351 18.661488, transfering to col
on to next reading
patch 13 of 17About to read patch 12
dispwin_set_color called
Taking 1 measurments in Emission mode called

i1pro: SetMeasureParam 14706, 22, 2, 0x06
SetMeasureParams got ICOM err 0x0

i1pro: Triggering measurement after 10msec delay
Scheduled triggering OK

i1pro: Read measurement results inummeas 2, scanflag 0, address 0x2800a00
bsize 0x200
Read 2 readings, ICOM err 0x0
(Trig & rd times 1 -11 2034 -11)
got reading abs. 9.244474 5.444631 49.060997, transfering to col
on to next reading
patch 14 of 17About to read patch 13
dispwin_set_color called
Taking 1 measurments in Emission mode called

i1pro: SetMeasureParam 14706, 22, 2, 0x06
SetMeasureParams got ICOM err 0x0

i1pro: Triggering measurement after 10msec delay
Scheduled triggering OK

i1pro: Read measurement results inummeas 2, scanflag 0, address 0x2800a00
bsize 0x200
Read 2 readings, ICOM err 0x0
(Trig & rd times 2 -12 2033 -12)
got reading abs. 19.508636 11.309780 105.255096, transfering to col
on to next reading
patch 15 of 17About to read patch 14
dispwin_set_color called
Taking 1 measurments in Emission mode called

i1pro: SetMeasureParam 14706, 22, 2, 0x06
SetMeasureParams got ICOM err 0x0

i1pro: Triggering measurement after 10msec delay
Scheduled triggering OK

i1pro: Read measurement results inummeas 2, scanflag 0, address 0x2800a00
bsize 0x200
Read 2 readings, ICOM err 0x0
(Trig & rd times 1 -11 2034 -11)
got reading abs. 134.654195 150.070500 18.392058, transfering to col
on to next reading
patch 16 of 17About to read patch 15
dispwin_set_color called
Taking 1 measurments in Emission mode called

i1pro: SetMeasureParam 14706, 22, 2, 0x06
SetMeasureParams got ICOM err 0x0

i1pro: Triggering measurement after 10msec delay
Scheduled triggering OK

i1pro: Read measurement results inummeas 2, scanflag 0, address 0x2800a00
bsize 0x200
Read 2 readings, ICOM err 0x0
(Trig & rd times 1 -11 2034 -11)
got reading abs. 102.695450 54.475053 110.141341, transfering to col
on to next reading
patch 17 of 17About to read patch 16
dispwin_set_color called
Taking 1 measurments in Emission mode called

i1pro: SetMeasureParam 14706, 22, 2, 0x06
SetMeasureParams got ICOM err 0x0

i1pro: Triggering measurement after 10msec delay
Scheduled triggering OK

i1pro: Read measurement results inummeas 2, scanflag 0, address 0x2800a00
bsize 0x200
Read 2 readings, ICOM err 0x0
(Trig & rd times 1 -11 2034 -11)
got reading abs. 71.060036 118.839193 121.160917, transfering to col
on to next reading

The instrument can be removed from the screen.

i1pro: Write EEProm address 0x0 size 0x428
(NOT) Write 0x428 bytes, ICOM err 0x0

i1pro: Write EEProm address 0x800 size 0x428
(NOT) Write 0x428 bytes, ICOM err 0x0

i1pro: Terminate switch Handling
Terminate Switch Handling done, ICOM err 0x0
icoms: delete called
icoms: closing port
usb_close_port() called
usb port has been released and closed
dispwin_set_ramdac called
dispwin_del called
Segmentation fault

Martin Weberg

Other related posts: