[argyllcms] Re: Display graphics card update

I just used MSI Control software and chose 4500 for frequency. Some
people run it at over 5 Ghz.
It was okay until couple of days ago.
Where can I get Intel software?

Sent from iPhone 4

On Jul 15, 2011, at 10:28 AM, János, Tóth F. <janos666@xxxxxxxxxx> wrote:

> How do you overclock that poor CPU?
> Did you use a stress test software to check if it's stable or not?
>
> Always use something like Prime95 or Intel Burn Test (I recommend
> this) after oveclocking. Run it on every cores and 1/2 or 3/4 of your
> system RAM for at least 20 min.
>
> A semmingly successfull bootup is nothing.
>
> Sent from a Nokia 5800 :)
>
> 2011/7/15, adam k <aak1946@xxxxxxxxx>:
>> Hi,
>> Now that I lowered overclocking to 4.2 background and other images display
>> OK, but I think that I'll re-check and possibly exchange my card.
>> Thank you!
>>
>> Sent from iPhone 4
>>
>> On Jul 15, 2011, at 9:40 AM, Nikolay Pokhilchenko <nikolay_po@xxxxxxx>
>> wrote:
>>
>> Adam, You've wrote:
>>
>> ...Also, images with a solid color background show white dots in solid color
>> area.
>>
>>
>> If the white dots are on true solid background (when color picker in
>> Photoshop shows the same RGB numbers in any point of background, even on
>> white dots), it lkely can be a hardware glitch or mailfunction. Try to run
>> Your hardware at normal frequencies and voltages. Check the coolers and
>> heatsinks.
>> Did You check the display for bad/hot pixels?
>>
>

Other related posts: