[argyllcms] Re: Dispcal fails

Graeme,

V0.70 doc seems incomplete as per the instrument flag?

> usage: dispread [options] outfile
>  -v              Verbose mode
>  -d n           Choose the display from the following list (default 1)
>     1 = 'CG21, at 0, 0, width 1600, height 1200 (Primary Display)'
>  -c listno      Set communication port from the following list (default  1)
>     1 = 'usb:/bus24/dev0 (Xrite DTP94)'
>                    92 = DTP92, 94 = DTP94, SO = Spectrolino
>  -y c|l          Display type, c = CRT, l = LCD
>  -k file.cal    Apply display calibration file while reading
>  -s               Save spectral information (default don't save)
>  -p ho,vo,ss  Position test window and scale it
>                    ho,vi: 0.0 = left/top, 0.5 = center, 1.0 = right/bottom
>                     ss: 0.5 = half, 1.0 = normal, 2.0 = double etc.
>  -K                Run instrument calibration first
>  -N                Disable auto calibration of instrument
>  -H                Use high resolution spectrum mode (if available)
>  -D [level]      Print debug diagnostics to stderr
>  outfile           Base name for input[ti1]/output[ti3] file

-v turns verbose mode on.
-d (I don't need to worry about this one)
-c (same as -d)

What about the instrument flag? It used to be -i but, now?

My command line keeps "crashing".

I type in 

> dispread -v 94 -yl -keizo_x94 eizo_x94

But I get:

> Error - CGATS file read error : Unable to open file '94.ti1' for reading

Dispread does mistaken 94 for the name of the *.ti1 file?

Roger Breton

Other related posts: