[argyllcms] Re: Direct matching between two displays
- From: Roger Breton <graxx@xxxxxxxxxxxx>
- To: argyllcms@xxxxxxxxxxxxx
- Date: Mon, 13 Feb 2012 03:49:08 -0500
To custom measure someone's own color matching functions requires special
equipment I only seen once in a school of optometry.
Roger
From: argyllcms-bounce@xxxxxxxxxxxxx [mailto:argyllcms-bounce@xxxxxxxxxxxxx]
On Behalf Of Ivan Tsyba
Sent: February-12-12 5:28 PM
To: argyllcms@xxxxxxxxxxxxx
Subject: [argyllcms] Re: Direct matching between two displays
2012/2/12 Roger Breton <graxx@xxxxxxxxxxxx>
Ideally, instead of using the 1931 Standard Observer color matching
functions, we would be using YOUR very own carefully measured color matching
functions.
Someone from this mailing list perform color matching experiment to build it
own Observer Functions? I think CIE Standard Observer functions is
acceptable in most cases in practice.
Calibrating to absolute gamma value is helpful in my situation or not?
Thanks
Other related posts:
