[argyllcms] Re: DIY probe

From: Frédéric <frederic.mantegazza@xxxxxxxxxxx>
To: argyllcms@xxxxxxxxxxxxx
Date: Thu, 23 Aug 2007 19:17:48 +0200

On Thursday 23 August 2007 02:13, Graeme Gill wrote:

> If you're using an unmodified HCFR, you probably want to change
> the calibration matrices appropriately - see about
> line 327 and 392 in hcfr.c. This only affects the brightness
> calibration.

For a beamer calibration, do you think I should use the 2.4mm aperture? Or 
is the default one ok? The probe will be at, say, 1m from the projection 
screen...

-- 
   Frédéric

   http://www.gbiloba.org

References:

[argyllcms] Re: DIY probe
From: Frédéric Mantegazza

[argyllcms] Re: DIY probe
From: Frédéric

[argyllcms] Re: DIY probe
From: Graeme Gill

[argyllcms] Re: DIY probe

Other related posts: