[argyllcms] Re: Calibrating the DTP94

Hello Roger,

Am 20.11.2006 um 13:12 schrieb Roger Breton:
I have seen a little circuit to interface the CS-100 to the parallel port of a PC. But the NRC wants too much money for it. So, for the meantime, I'll 
resort to manual data collection means.


Doesn't it have an RS232 port ?


My CS-100 is a CS-100 not a CS-100A model :(
So I'm stuck with a proprietary interface.
I guess someone could conceivably design a serial interface to it. But I don't have the electronics knowledge to do that myself. Would you know where 
I could hire such a person on the internet?
Hm, it does not have a serial interface, it does not have a parallel interface. 
So how is it connected to a PC?


I have the wiring and timing
information for the CS-100 interface.


Send it to me!

Rolf

-----------------------------------------------------
Multitools
Dipl.-Ing. Rolf Gierling

Colormanagement
Consulting - Development - Distribution

Mariabrunnstr. 16
52064 Aachen
Germany

Tel.  +49 (0) 2 41 / 4 01 25 79
Fax. +49 (0) 2 41 / 4 01 25 83
mail@xxxxxxxxxxxxxxxxxxxx
www.multitools-online.de

Author of "Farbmanagement"
3rd Edition July 2006
mitp Verlag, Bonn
ISBN 3-8266-1626-X

Other related posts: