[arachne] Re: The continuing saga of mel's arachne setup
- From: "da Silva, Joe" <Joe.daSilva@xxxxxxxxxxxxxxxxxxx>
- To: "'arachne@xxxxxxxxxxxxx'" <arachne@xxxxxxxxxxxxx>
- Date: Tue, 25 May 2004 10:48:29 +1000
Arachne at FreeLists---The Arachne Fan Club!
Well Mel, I have are two suggestions for you :
1. Install LSPPP as your packet driver (install LSPPPCFG to make
this process "quick and painless").
2. Install my 1.73J4 core, which (among other features) is optimized
for minimum memory usage.
These two changes combined should save you about 50K (give or
take some).
Joe.
http://www.geocities.com/j_ds_au/
> -----Original Message-----
> From: Mel Evans [SMTP:arachne4dos@xxxxxxxxxxxxx]
> Sent: Saturday, May 22, 2004 8:39 PM
> To: arachne@xxxxxxxxxxxxx
> Subject: [arachne] The continuing saga of mel's arachne setup
>
> Arachne at FreeLists---The Arachne Fan Club!
>
> On Thu, 20 May 2004 15:10:16 -0600, Glenn Gilbreath Jr. wrote:
> >Arachne at FreeLists---The Arachne Fan Club!
> >
> >Mel,
> >
> >You are not using any extended/expanded memory manager,
> >therefore your device drivers are all being loaded in=
> conventional
> >memory. In your CONFIG.SYS file, right below the line that=
> loads
> >HIMEM.SYS, you need to add this line:
> >
> >DEVICE=3DC:\WINDOWS\COMMAND\EMM386.EXE NOEMS
> >
> >Also, all of the lines loading your various CD ROM drivers,
> >change the "device=3D" to "devicehigh=3D" (without quote marks).
> >
> >Once these changes are done, save the file and reboot...
> >Now check your free memory!
> >C U L8R!
> >Wiz <{;-)
> >The other Glenn
>
> Hi other Glenn et al,
>
> Device c noems line entered saved and re-booted. Machine works ok=
> on
> all fronts, NO repeat NO difference whatsoever to free memory in=
> mem
> or mem/c files.
>
> Did devicehigh entry to all cd lines, results exactly as above,=
> there
> is NO difference at all to the free memory in MEM or MEM/c files,=
> and
> arachne advice panel still shows 81(+)
>
> Aarachne dials up and tries to hand shake from sound of modem,=
> then
> just sits down and stalls to eventually give
>
> ppplink down or driver not installed message
>
> and goes into fly to dialler loop.
>
> Any other thoughts anyone?
>
> Regards
>
> mel
>
>
> Arachne at FreeLists
> -- Arachne, The Web Browser/Suite for DOS and Linux --
Arachne at FreeLists
-- Arachne, The Web Browser/Suite for DOS and Linux --
Other related posts: