Arachne at FreeLists---The Arachne Fan Club! On Thu, 21 Feb 2008 17:22:24 +0100, Bastiaan Edelman wrote: > On Wed, 20 Feb 2008 16:20:17 -0500, Glenn McCorkle wrote: >>> After "Use New Settings" no connection to internet could be made (ADSL) >>> "Error in TCP/IP configuration" > Keying in the IP_Address 192.168.1.65 did go wrong after "OK" button. > Looking again at the settings... the IP_Address box was empty! > So I gave the IP-Address again in arachne.cfg manualy! > But, do not use the wizard after that for the IP_Address is set back to > BOOTP in arachne.cfg :-((( Sionce you need to set a static IP .... During the wizard setup, on this page....file:system\gui\etherwz2.ah Pick 'Manual setup' which will take you to... file:system\gui\etherwz3.ah Now you can set .... Static IP address, the DNSs, netmask, gateway & altgatway. -- Glenn http://www.delorie.com/listserv/mime/ http://www.cisnet.com/glennmcc/ http://www.law.cornell.edu/constitution/constitution.table.html Arachne at FreeLists -- Arachne, The Premier GPL Web Browser/Suite for DOS --