[arachne] Re: Ethernet

Arachne at FreeLists---The Arachne Fan Club!

On Mon, 27 Oct 2008 21:04:18 -0400 (EDT), Steve <steve@xxxxxxxxxxxxxxx> wrote:


> Step 2a:

> Remove the cable and check to see if it's a straight
> through or crossover.  When I went computer to computer
> with hardware of the 90's a crossover cable was required.
> Straight through:  hold both connectors side by side
> and the wire colors will be in the same sequence.
> Crossover:  Hold connectors side by side and some of
> the wires will be reversed.

The packet said "crossover" and Yes, some of the colours are swapped
over.

The XP comp shows "cable unplugged" when the DOS comp is powered down
and "connected" when the DOS comp is running. IMO that indicates that
something is right ;-)

Next step?

    Go placidly amid the noise and haste,
    and remember what peace there may be in silence.
        "Desiderata", Max Ehrmann, copyright 1952.

   ,-./\
  /     \ From Greg Mayman, in beautiful Adelaide, South Australia
  \_,-*_/   "Queen City of The South"  35d 01'44"S  138d 32'13"E
       v

                  Arachne at FreeLists                  
-- Arachne, The Premier GPL Web Browser/Suite for DOS --

Other related posts: