Arachne at FreeLists---The Arachne Fan Club!
Hi Greg,
On Fri, 24 Oct 2008 14:14:20 +0930, Greg Mayman wrote:
> Unzipped with no problems.
>> Setup an username/password for yourself in c:\nos\etc\ftpusers
> Yup. Done that. Coincidentally, drive G: is a spare partition on my comp
> so it is logical to use it.
> "greg 99 g:\ 127"
>> To start her up... cd to c:\nos and run HTTPLAN.BAT
>> (starts both the HTTP & FTP server modes of EZ-NOS2 )
> But I had to load the network card drivers and the packet driver first.
>> Now fire-up LeapFTP over on the Windows machine and connect to
>> 192.168.1.100 which is the IP address of the EZ-NOS HTTP/FTP server
>> as setup in that copy of autoexec.lan which gets copied to autoexec.nos
> I had to shut down the XP machine and reboot before it would acknowledge
> that the LAN was connected.
> But running LeapFTP and enterring the address as 192.168.1.100 gave me
> "Connection failed (no route to host)" although the network ikon at the
> bottom of the screen is on and shows connection at 100 Mb/s.
Try using 192.168.1.1
or 192.168.1.2
With only two computers in the LAN, these are the most likely
addresses, one for each.
Regards,
Ron
Ron Clarke
AUSREG Consultancy http://www.ausreg.com
Tadpole Tunes http://www.tadpoletunes.com
-- This mail was written by a user of the Arachne Browser - http://arachne.cz/
Arachne at FreeLists
-- Arachne, The Premier GPL Web Browser/Suite for DOS --