Arachne at FreeLists---The Arachne Fan Club! On Fri, 24 Oct 2008 10:20:37 +0930, Greg Mayman wrote: > Progress report on Ethernet... results: nothing works. > Personal Netware when started gives the error code "3C503 -Card not > found" and locks up the system. > EZNOS: I have followed all the instructions in the READ.ME file as far > as I can (for example; what is the ip address required in AUTOEXEC.NOS?). > When HTTPD.BAT is run, I get several messages at the top that "eth0" is > not found. After that everything looks alright but it won't connect. > It appears that there is just too much that I don't understand. http://www.glennmcc.org/my-stuff/nosfiles.zip Length Method Size Ratio Date Time CRC-32 Name -------- ------ ------- ----- ---- ---- ------ ---- 0 Stored 0 0% 10-23-08 22:23 00000000 NOS/ETC/ 308 Defl:X 199 35% 10-23-08 22:25 14119321 NOS/HTTPLAN.BAT 2639 Defl:X 1183 55% 10-19-08 16:54 76d544bb NOS/ETC/AUTOEXEC.LAN 894 Defl:X 403 55% 10-23-08 22:23 6c3fb9a7 NOS/ETC/FTPUSERS -------- ------- --- ------- 3841 1785 54% 4 files ________________________________________________________________________________ Setup an username/password for yourself in c:\nos\etc\ftpusers and point yourself to the dir on the DOS machine where you have placed the files you want to transfer to the Windows machine. example: glennmcc quark g:\ 127 That gives me 'full access' the _everything_ on drive G: (all of the files in all of the directories) _______________________________________________________________ To start her up... cd to c:\nos and run HTTPLAN.BAT (starts both the HTTP & FTP server modes of EZ-NOS2 ) --- contents of c:\nos\httplan.bat --- @echo off c: cd \ cd c:\nos copy etc\autoexec.lan etc\autoexec.nos REM Start up ethernet driver to your NIC.@ interrupt 0x62 rem lh c:\nos\bin\3c509 0x62 REM start server c:\nos\bin\eznos.exe -f\nos\etc\nos.cfg REM when the server exits, shutdown the net rem c:\nos\bin\termin 0x62 :end ___________________________________________________________________ Now fire-up LeapFTP over on the Windows machine and connect to 192.168.1.100 which is the IP address of the EZ-NOS HTTP/FTP server as setup in that copy of autoexec.lan which gets copied to autoexec.nos Login with the username/password that you setup in ftpusers and you can now download any file from that dir (and its subdirs), over onto the Windows machine. If you set the permissions to 'level 2' or higher..... you can also use LeapFTP to upload files from the Windows machine to the DOS machine. (into whichever dir you have navigated to with LeapFTP) -- Glenn http://www.delorie.com/listserv/mime/ http://www.delorie.com/djgpp/doc/msdog.html http://www.glennmcc.org/ http://www.law.cornell.edu/constitution/constitution.table.html Arachne at FreeLists -- Arachne, The Premier GPL Web Browser/Suite for DOS --