[arachne] Re: Broadband connections

Arachne at FreeLists---The Arachne Fan Club!

These are the settings that I use for NIC/DSL

--- in autoexec.bat ---

call loadlne.bat

________________________

--- loadlne.bat ---

lh c:\lne100tx\lne100tx.com -1 -a -f -s 0x60

_____________________________________________

My PCI NIC card is a ................

Linksys LNE100TX Fast Ethernet Adapter Packet Driver  v 1.06 (991217)
Copyright (C) 2000 Linksys GroupAll Rights Reserved.

usage:

LNE100TX [-#] [-a] [-t] [-f] [-s] [-n] [-w] [-u] [-h] <PD_INT_NO>
       option:
         -#            specify which adapter will be used
                       -1, is the first one , -2 is the second one, etc.
         -a            media auto-detection
         -t            10Mbps rate
         -f            full duplex mode
         -s            100Mbps rate
         -n            convert ETHERNET_II header to IEEE 802.3 header
         -w            let packet driver run under WINDOWS
         -u            unload the packet driver
         -h            on line HELP
       parameter:
         PD_INT_NO     packet driver INT entry (0x60 to 0x80)

____________________________________________________________________________

--- in arachne.cfg ---

[profile]
Profile ara-net.ACF
Connection READY
Hangup NULL

[tcp/ip]
IP_Address WATTCP
IP_Grab IP address set to
NameServer
AltNameServer
Gateway 0.0.0.0
AltGateway 0.0.0.0
Netmask 0.0.0.0
TCPconfig PPPTCP.CFG

________________________________

--- ppptcp.cfg --

my_ip = dhcp
netmask = 255.255.255.0
gateway = 0.0.0.0
sockdelay=60
hostname=arachne
mss=1600

_______________________________

The DSL modem I have is a SpeedStream 4100

Its IP address is 192.168.0.1



-- 
 Glenn
 http://www.delorie.com/listserv/mime/
 http://www.cisnet.com/glennmcc/
 http://www.law.cornell.edu/constitution/constitution.table.html
                  Arachne at FreeLists                  
-- Arachne, The Premier GPL Web Browser/Suite for DOS --

Other related posts: