[arachne] Re: ADSL still not working

Arachne at FreeLists---The Arachne Fan Club!

Hi Constant,

> And tcpinfo gave following info:

> Reading configuration file `.\wattcp.cfg'
>  Warning: %WATT_ROOT% not set.
> This is okay if you're not planning to program with Watt-32
> .\wattcp.cfg (7): Missing line-termination could break old WatTcp programs.
> .\wattcp.cfg (7): Missing line-termination could break old WatTcp programs.
> Configuring through BOOTP..failed
> failed
> Configuring through DHCP..failed
> Configuring through RARP...failed
> All attempt (config-file/DHCP/BOOTP/RARP) to get a IP-address failed.

> Check your configuration.
> Warning: "NETMASK" is 0.0.0.0 !
> Warning: multiple or no default gateway!
> PKTDRVR Name     : NE2000, version 0.11, API ?, intr 0x60
>         Class    : Ethernet, level 2, RX mode 5
>         Address  : 00:50:BA:C0:36:BA
> IP Address       : 0.0.0.0

> Network Mask     : 0.0.0.0
> Gateways         : NONE

just for the record, here is what TCPINFO says on my system:

m:\wattcp.cfg not found
Configuring through BOOTP..okay
Reading configuration file `m:\wattcp.cfg'
Warning: %WATT_ROOT% not set.
This is okay if you're not planning to program with Watt-32
PKTDRVR Name     : ODIPKT, version 0.21, API 1.09, intr 0x60
        Class    : Ethernet, level 6, addr-len 6, MTU 1514, MC avail 48
        RX bufs  : 1, TX bufs 1, EOI intr 115, RX mode 5
        Address  : 00:08:54:37:34:B8

IP Address       : 192.168.0.2
Network Mask     : 255.255.255.0

Gateways         : GATEWAY'S IP     SUBNET           SUBNET MASK
                 : 192.168.0.1      DEFAULT          DEFAULT

ARP Cache        : IP Address       MAC Address        Type    Timeout
                   <None>           <None>

Host name        : dhcppc1.your.domain.com
Domain name      : your.domain.com
Nameserver       : 192.168.0.1  Timeout 120s

BOOTP            : Enabled and SUCCEEDED
BOOTP Server     : 255.255.255.255
BOOTP Timeout    : 15 seconds

IPv6-address     : FE80::2001:80FF:FE37:34B8
6-to-4 gateway   : 0.0.0.0

Max Seg Size,MSS : 1460 bytes
Max Transmit,MTU : 1500 bytes

TCP timers       : Sock delay 30s, Inactivity 0s, Keep-alive 120s/30s
                 : Open 1000ms, Close 1000ms, RST time 100ms
                 : RTO base 10ms, RTO add 100ms, Retrans 10ms

_tcp_Socket size : 4460 bytes
_udp_Socket size : 1736 bytes

HOSTS file       : <NONE>
HOSTS6 file      : <NONE>
SERVICES file    : <NONE>
PROTOCOL file    : <NONE>
NETWORKS file    : <NONE>
ETHERS file      : <NONE>

Version info     : Watt-32 (2.2.10), GNU-C 3.4.4 (Pent), djgpp 2.03, Jan 13 2006
Capabilities     :
/debug/mcast/bind/BSDsock/BSDfatal/bootp/dhcp/rarp/lang/frag/stat/fortify/fsext/loopback/tftp/echo/PPPoE/IPv6/RS232/gzip-compr/
CP-MD5/DynIP/profiler/fast-pkt

Note that I did not have a wattcp.cfg file in the directory where I ran
TCPINFO.

There might be a problem with your wattcp.cfg file, so please try again
without it.

If this also fails, it is time to check the two components that you have
blindly trusted so far: Your networking card and its packet driver.

Regards,

Udo

-- The DR-DOS/OpenDOS Enhancement Project - http://www.drdosprojects.de

-- This mail was written by a user of The Arachne Browser - http://arachne.cz/
                  Arachne at FreeLists                  
-- Arachne, The Premier GPL Web Browser/Suite for DOS --

Other related posts: