[analogorgans] Re: Zymbelstern
- From: "Mark Veazie" <mveazie@xxxxxxxxx>
- To: <analogorgans@xxxxxxxxxxxxx>
- Date: Sun, 2 Nov 2008 17:34:42 -0800
Hi Jerry - Thanks for your response. I have a Rodgers 250dlm. This
helps a lot.
Mark
-----Original Message-----
From: analogorgans-bounce@xxxxxxxxxxxxx
[mailto:analogorgans-bounce@xxxxxxxxxxxxx] On Behalf Of Jerry Akers
Sent: Sunday, November 02, 2008 2:02 PM
To: analogorgans@xxxxxxxxxxxxx
Subject: [analogorgans] Re: Zymbelstern
What model Rodgers do you have? I believe that on ALL of them, there is
a switched 12VDC circuit that is designed to fire a relay. So, you'll
need to get a 12VDC relay that can switch on (one leg of) the AC to the
"record player". Is this enough to get you goin'?
If you give me the model number, I can log in to the rodgers tech
website and see what schematics are available for this model. But, like
I said, it's almost a sure thing that it is a 12VDC output.
_____
From: noel jones <gedeckt@xxxxxxxx>
To: analogorgans@xxxxxxxxxxxxx
Sent: Sunday, November 2, 2008 12:55:20 PM
Subject: [analogorgans] Re: Zymbelstern
Junk shop, 45 RPM record player.
noel
On Nov 2, 2008, at 2:33 PM, Jerry Akers wrote:
Hi Mark,
It all hinges on what kind of motor you are going to use. AC or DC?
You definitely want to find a small, quiet, low RPM unit...
I have made many of these for use on Rodgers organs (and others). So,
let me know when you decide on a motor and I'll help you with a circuit
that will work with it.
Best regards,
Jerry Akers
_____
From: Mark Veazie <mveazie@xxxxxxxxx>
To: analogorgans@xxxxxxxxxxxxx
Sent: Sunday, November 2, 2008 10:00:59 AM
Subject: [analogorgans] Zymbelstern
Greetings All
I want to add a zymbelstern to my Rodgers that is already setup for it.
Just for fun I thought I would try to build one. I have the best
platform for it. Does anyone know where I might acquire a schematic
diagram for one? I've spent hours on the internet with no luck.
Thanks
Mark Veazie - Palm Desert, CA
Other related posts:
