[amayausers] Re: x motor error

This message was posted by SewingMatters on AmayaUsers.com. PLEASE DO NOT REPLY 
VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: 
http://www.amayausers.com/boards/ultimatebb.php?/topic/1/120.html

In the middle of sewing I had an X Error message come up and of course the 
machine stopped. I did like I have before for a Z axis error and hit the 
emergancy stop button and then turned it back on. Just for reference this 
machine has a new mother board and new Z axis motor. Replaced yesterday. And it 
ran fine all yesterday afternoon. Anyway, when I started the machine back up it 
didn't move but tried to sew the design in one single spot. And gave me an 
error of machine sewing when not at head up. I reset the design did a head up 
went fine. Went through all the steppers, trace the design, everything seemed 
to move fine. Started the design and again it never moved just kept sewing in 
the same spot. Got the same machine sewing when not at head up. Again I tried 
to got to the computer and do a head up but my software Amaya OS will not let 
me go to the machine. It freezes when I try, I done off/on with the machine, 
restarts with the computer, I just can't get the computer to opera
 te with the machine in anyway. Was it a problem with the orginal X motor 
error. Or something else. Please just don't tell me it's in the mother board 
that thing cost entirely to much! Help! 
Thanks to all

=========================================================== 

The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list

===========================================================

Other related posts: