[amayausers.com] Re: vitronic 5 panel cap

This message was posted by Etched In Thread on AmayaUsers.com. PLEASE DO NOT 
REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking 
here: http://www.amayausers.com/boards/ultimatebb.php?/topic/2/383.html

Hi all, I have a question about the above cap. I've not heard anyone mention 
it, but it has this stiff (buckram?) flap inside of the front panel and a soft 
iron on stabilizer on the cap itself. do i embroider over the flap or do I move 
that out of the way to embroider? I've had my red Amaya almost 3 years and this 
is the first time I'm doing caps on it. Raised needle plate is on, is there a 
specific tension or just wantever works? Is the presser foot up all the way and 
a couple of clicks down? It's hard trying to go by memory from class 2 years 
ago and I could not find any reference to this in the help or in the manual. 
Thanks so much! BTW, hope everyone had a Wonderful Christmas and wish you all a 
very Prosperous and Happy New Year. I was stitching nonstop for days, last 
customer picking up her order Monday at 7:30pm. Thank goodness its over! Thanks 
again in advance.

=========================================================== 

The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list

===========================================================

Other related posts: