[amayausers.com] Re: thread wrapped around gear

This message was posted by Rod or Sharon on AmayaUsers.com. PLEASE DO NOT REPLY 
VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: 
http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/1/1139.html#000009

Mama,

Yes use the Poly lubricant.

You need to keep working at getting that thread out of the hub area. You will 
have to work from both the front and the back. Have someone depress and hold in 
the little red locking tab so the gear can turn freely in both directions. You 
can then concentrate on using the Xacto knife and tweasers to scrub and pick at 
the tread. Yes, I know it's a pain, but by turning the gear forward and 
backward and spinning it , you will get it out of there..... don't give up..I 
have had to do this many times over the years.... ;-(

Rod Springer
Amaya tech & Trainer

=========================================================== 

The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list

===========================================================

Other related posts: