[amayausers.com] Re: thread setup 101

This message was posted by Shuffletown Embroidery on AmayaUsers.com. PLEASE DO 
NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking 
here: http://www.amayausers.com/boards/ultimatebb.php?/topic/2/773.html#000004

An answer to my original question....
I tried a counter-clockwise feed off the top of 4 mini-cones, and a clockwise 
feed for 6 mini-cones. One of the counter-clockwise threads twisted back on 
itself and went into the tube all bunched up. Some times it would come out as a 
knot past the pinch rollers.... not good.
The problem went away when I changed the feed to clockwise. The other 3 
counter-clockwise threads did OK as did the 6 clockwise threads. My experiment 
isn't necessarily conclusive but from now on, I'm going with the clockwise feed.
Mary

=========================================================== 

The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list

===========================================================

Other related posts: