[amayausers] thread rollers
- From: "Iris Slack" <i.sew@xxxxxxxxxxx>
- To: <amayausers@xxxxxxxxxxxxx>
- Date: Sat, 29 Apr 2006 16:55:45 -0500
Since I changed out the thread rollers for the 1st time (and everything else
in the kit), the thread doesn't seem to stay in the right position, it comes
out from between the rollers. Any suggestions? Seems if I put slight
pressure on the red roller the thread stays in position.
Slack Embroidery Works
i.sew@xxxxxxxxxxx
Iris Slack
1708 Redcedar Drive
Wylie, TX 75098
972-754-4522
972-429-1621 (fax)
Other related posts:
