[amayausers] Re: standard hoops

Take the time to look up the description of Melco PN 010942-01 which is a 30 X 
36 cm hoop.  This hoop is designed for "Jacket Backs."  That is the reason for 
the difference of size between the outer and inner portion pieces of the hoop.
 
Joel
Embroidery By Joel
 

Captain Gold <captaingold@xxxxxxxxxxxxx> wrote:
I have a question for everyone that got the "basic" pack of four hoops (2 
of each size). I'm having issues with the rectangular plastic hoop. It does 
not tighten - at it's tightest point it slides apart and when holding it up 
to the light there is approximately a 1/16th inch gap between the two 
hoops. I've wrapped one in the yellow athletic tape, added backing, and 
even added heavier fabric at the edges to avoid the slippage problem. It's 
gotten so I'd rather switch arms and use the larger wooden square hoop 
rather than fight with the rectangular. Do any of you have the same 
problems? What have you done to fix this?

Connie Bechtel
Wyvern Productions


---------------------------------------------------------------------
To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx

Other related posts: