[amayausers] Re: standard hoops

  We have cut pieces of Rubbermaid shelf lining and place between the
hoops--usually at just the corners, but guess it could be wherever you need
it.  The other option is to wrap your hoop with something such as grossgrain
ribbon or seam binding.  There are other things as well, but this works.
  Sharon
  ----- Original Message ----- 
  From: "Captain Gold" <captaingold@xxxxxxxxxxxxx>
  To: <amayausers@xxxxxxxxxxxxxxxx>
  Sent: Thursday, December 18, 2003 7:06 AM
  Subject: [amayausers] standard hoops


  > I have a question for everyone that got the "basic" pack of four hoops
(2
  > of each size). I'm having issues with the rectangular plastic hoop. It
does
  > not tighten - at it's tightest point it slides apart and when holding it
up
  > to the light there is approximately a 1/16th inch gap between the two
  > hoops. I've wrapped one in the yellow athletic tape, added backing, and
  > even added heavier fabric at the edges to avoid the slippage problem.
It's
  > gotten so I'd rather switch arms and use the larger wooden square hoop
  > rather than fight with the rectangular. Do any of you have the same
  > problems? What have you done to fix this?
  >
  > Connie Bechtel
  > Wyvern Productions
  >
  >
  > ---------------------------------------------------------------------
  > To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
  > For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx
  >
  >


---------------------------------------------------------------------
To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx

Other related posts: