[amayausers] Re: standard hoops

connie...I have the same basic problem. But at the class, I was told that
most users needed to wrap this hoop with some material to make it work
"better". I wrapped my hoop (the inside portion) with the "rubber" material
used in motorhomes to keep the dishes and such from sliding around.  I have
seen it at Wal-mart and Kmart stores. I cut into strips about 1 1/2 inches
wide and went around the entire hoop.  It sure help the slipping problem.
charlie
----- Original Message ----- 
From: "Captain Gold" <captaingold@xxxxxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxxxxx>
Sent: Thursday, December 18, 2003 6:06 AM
Subject: [amayausers] standard hoops


> I have a question for everyone that got the "basic" pack of four hoops (2
> of each size). I'm having issues with the rectangular plastic hoop. It
does
> not tighten - at it's tightest point it slides apart and when holding it
up
> to the light there is approximately a 1/16th inch gap between the two
> hoops. I've wrapped one in the yellow athletic tape, added backing, and
> even added heavier fabric at the edges to avoid the slippage problem. It's
> gotten so I'd rather switch arms and use the larger wooden square hoop
> rather than fight with the rectangular. Do any of you have the same
> problems? What have you done to fix this?
>
> Connie Bechtel
> Wyvern Productions
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
> For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx
>
>



---------------------------------------------------------------------
To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx

Other related posts: