[amayausers] Re: standard hoops

This is a very good point! I have the same issue to a lesser
degree. I took out the screw completely and re-seated as
evenly as possible between the two sides, and that probably
improved it by 1/32", but it is still loose. It is probably
worth a call to Melco, rather than just living with it! Not
sure why I didn't think to raise the issue with our rep.

-David O.

> I have a question for everyone that got the "basic" pack
> of four hoops (2  of each size). I'm having issues with
> the rectangular plastic hoop. It does  not tighten - at
> it's tightest point it slides apart and when holding it up
> to the light there is approximately a 1/16th inch gap
> between the two  hoops. I've wrapped one in the yellow
> athletic tape, added backing, and  even added heavier
> fabric at the edges to avoid the slippage problem. It's
> gotten so I'd rather switch arms and use the larger wooden
> square hoop  rather than fight with the rectangular. Do
> any of you have the same  problems? What have you done to
> fix this?
> Connie Bechtel
> Wyvern Productions
>
>
> ----------------------------------------------------------
> ----------- To unsubscribe, e-mail:
> amayausers-unsubscribe@xxxxxxxxxxxxxxxx For additional
> commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx

---------------------------------------------------------------------
To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx

Other related posts: