[amayausers] Re: slim line hoop clamp

Ditto Herb!
I now own both, and I never use the sticky paper frames. I've thought about
using them to frame things to hang on the wall, but they would probably fall
off too! :0). Anyway, I like the clamping system, but am very careful about
using it on the Amaya (I don't have the newer models).
Evelyn - Express It With Thread

----- Original Message ----- 
From: "HK Acree" <hkacree@xxxxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxx>
Sent: Tuesday, October 25, 2005 2:04 PM
Subject: [amayausers] Re: slim line hoop clamp


> Dean,
> I'm going to own up here. I bought the fast frames and frankly find them
> pretty much a waste of money. While there have been a few projects they
did
> make easier, after some experience I could have done them without the fast
> frames. The adhesive is not strong enough to hold much of anything. If I
had
> it to do over I would have gone for a clamping system.
>
> Herb
> Royal Embroidery
> ----- Original Message ----- 
> From: "Dean Zellman" <mrstitch@xxxxxxxxxxx>
> To: <amayausers@xxxxxxxxxxxxx>
> Sent: Tuesday, October 25, 2005 8:15 AM
> Subject: [amayausers] Re: slim line hoop clamp
>
>
> > On this subject,
> >
> > I have the chance to get either the Fast Frame hooping system - the one
> > where you use sticky paper or the Hooptec clamping system.
> >
> > Can anyone give me some feedback on one over the other?
> >
> > Thanks
> >
> > Dean Zellman
> > Mr. Stitch Embroidery
> > (818) 386-9626
> > Visit us on the Web at www.mr-stitch.com
> >
> >
> > -----Original Message-----
> > From: amayausers-bounce@xxxxxxxxxxxxx
> > [mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of Roland R. Irish
> > III
> > Sent: Tuesday, October 25, 2005 5:03 AM
> > To: amayausers@xxxxxxxxxxxxx
> > Subject: [amayausers] Re: slim line hoop clamp
> >
> >
> > Anyone seen and/or using the Hooptec slim line clamping system on the
> > Amaya? From what info I've recieved it has a lower profile than the
> > regular hooptech and the Melco hooping clamp so it won't run into the
> > presser foot and needle head? Roland
> >
> >
>
>

Other related posts: