[amayausers] Re: slim line hoop clamp

As for small items that you can't hoop in a regular hoop, would the
clamping system work or is it better to just use sticky paper with a
regular hoop? 

-----Original Message-----
From: amayausers-bounce@xxxxxxxxxxxxx
[mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of Lee or Terri
Hoover
Sent: Tuesday, October 25, 2005 12:09 PM
To: amayausers@xxxxxxxxxxxxx
Subject: [amayausers] Re: slim line hoop clamp


Dean,

I bought and use the 7n1 fast frames.  For some of the things I do that
WAS my only choice.  I do not like the sticky backing as it really gums
up the needles.  When using the fast frames, I usually use clamps or
clips to hold the item.  If I were buying something NOW where there IS a
choice I would probably pick the clamping system as it seems it should
do the job without the backing issue.  Remember though I have not tried
the clamping system.

Terri Hoover
Embroidery Creations

-----Original Message-----
From: amayausers-bounce@xxxxxxxxxxxxx
[mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of HK Acree
Sent: Tuesday, October 25, 2005 1:04 PM
To: amayausers@xxxxxxxxxxxxx
Subject: [amayausers] Re: slim line hoop clamp

Dean,
I'm going to own up here. I bought the fast frames and frankly find them

pretty much a waste of money. While there have been a few projects they
did 
make easier, after some experience I could have done them without the
fast 
frames. The adhesive is not strong enough to hold much of anything. If I
had

it to do over I would have gone for a clamping system.

Herb
Royal Embroidery
----- Original Message ----- 
From: "Dean Zellman" <mrstitch@xxxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxx>
Sent: Tuesday, October 25, 2005 8:15 AM
Subject: [amayausers] Re: slim line hoop clamp


> On this subject,
>
> I have the chance to get either the Fast Frame hooping system - the 
> one where you use sticky paper or the Hooptec clamping system.
>
> Can anyone give me some feedback on one over the other?
>
> Thanks
>
> Dean Zellman
> Mr. Stitch Embroidery
> (818) 386-9626
> Visit us on the Web at www.mr-stitch.com
>
>
> -----Original Message-----
> From: amayausers-bounce@xxxxxxxxxxxxx 
> [mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of Roland R. Irish 
> III
> Sent: Tuesday, October 25, 2005 5:03 AM
> To: amayausers@xxxxxxxxxxxxx
> Subject: [amayausers] Re: slim line hoop clamp
>
>
> Anyone seen and/or using the Hooptec slim line clamping system on the 
> Amaya? From what info I've recieved it has a lower profile than the 
> regular hooptech and the Melco hooping clamp so it won't run into the 
> presser foot and needle head? Roland
>
>

Other related posts: