[amayausers] Re: red feed wheels breaking?
- From: "Veena Viswanath" <irisembroidery@xxxxxxxxxxxxx>
- To: <amayausers@xxxxxxxxxxxxx>
- Date: Fri, 19 Jan 2007 07:37:24 -0800
Thanks Ed for that information. I name everything on the look of the tool
since I only knew the hammer, and screwdriver(flat) not even the Phillips.
I learnt that after coming here.
Veena.
Iris Embroidery
510-226-6171
www.irisembroidery.com
Embroidery, Screen-printing or Promotions!!
-----Original Message-----
From: amayausers-bounce@xxxxxxxxxxxxx
[mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of e3m@xxxxxxx
Sent: Friday, January 19, 2007 7:00 AM
To: amayausers@xxxxxxxxxxxxx
Subject: [amayausers] Re: red feed wheels breaking?
Hey Veena,
If what you are referring to is the " L " shaped screw driver (set) that
comes with your machine purchase, the proper name for that tool is an "Allen
Wrench" set. In Metric sizes.
Hope this helps.
Ed Orantes
-------------- Original message from "Veena Viswanath"
<irisembroidery@xxxxxxxxxxxxx>: --------------
> The screws are in the back. You do not need to remove any needles. You
> should have a L shaped bent screw in your kit which you use to remove the
> screws.
>
> Veena.
>
> Iris Embroidery
> 510-226-6171
> www.irisembroidery.com
> Embroidery, Screen-printing or Promotions!!
>
> -----Original Message-----
> From: amayausers-bounce@xxxxxxxxxxxxx
> [mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of Tom Ladow
> Sent: Friday, January 12, 2007 7:56 AM
> To: amayausers@xxxxxxxxxxxxx
> Subject: [amayausers] Re: red feed wheels breaking?
>
> Rod;
> Any special tips on removing the needle plate cover. At first glance I can
> not tell where the attaching screws are located. Do you have to unthread
> all needles to do this?
>
> Tom L.
> Indiana
>
> -----Original Message-----
> From: amayausers-bounce@xxxxxxxxxxxxx
> [mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of
> webmaster@xxxxxxxxxxxxxx
> Sent: Friday, January 12, 2007 10:29 AM
> To: amayausers@xxxxxxxxxxxxx
> Subject: [amayausers] Re: red feed wheels breaking?
>
> This message was posted by Rod or Sharon on AmayaUsers.com. PLEASE DO NOT
> REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking
> here:
> http://www.amayausers.com/boards/ultimatebb.php?/topic/1/39/2.html#000015
>
> Debbie,
> Always replace the black cover on the thread feed roller, before putting
the
> red pinch roller back on..it is much easier that way. I gives you more
room
> to manuver the cover that way.....
> Rod Springer
> Melco tech & trainer
> ===========================================================
>
> The AmayaUsers Mailing List
> Website: http://www.amayausers.com
> Discussion Board: http://www.amayausers.com/boards
> Subscribe/Unsubscribe: http://www.amayausers.com/list
>
> ===========================================================
>
>
> ===========================================================
>
> The AmayaUsers Mailing List
> Website: http://www.amayausers.com
> Discussion Board: http://www.amayausers.com/boards
> Subscribe/Unsubscribe: http://www.amayausers.com/list
>
> ===========================================================
>
> ===========================================================
>
> The AmayaUsers Mailing List
> Website: http://www.amayausers.com
> Discussion Board: http://www.amayausers.com/boards
> Subscribe/Unsubscribe: http://www.amayausers.com/list
>
> ===========================================================
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
