[amayausers.com] Re: rayon advice

This message was posted by Judy on AmayaUsers.com. PLEASE DO NOT REPLY VIA 
EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: 
http://www.amayausers.com/boards/ultimatebb.php?/topic/2/625.html#000001

I used rayon for a long time, using up my home embroidery thread on the 
commercial machine.  For the older Amaya, I set it at a thread feed of six for 
sewing on denim or quilted material, and maximum speed of 1,000.  Good 
stabilizing is a must also.  For the XT, be certain to select "rayon" as the 
thread type in settings, stabilize the daylights out of your hooped item, and 
use manual thread feed. You'll have to play with it more to get it to run 
without breaks; somewhere between two and six, and if the design is layered, 
the further into sewing it out you get and the more layers you get, the more 
you'll have to increase your thread feed.  Good luck

=========================================================== 

The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list

===========================================================

Other related posts: