[amayausers] Re: oops!!!

I've had that happen several times. It's just a knack of sliding it back
into place. It took me a few times but you need to get the groove of the bar
between the female groove of the cap frame. It helps if you have the driver
bar to one of the edges, it makes it easier to put back into place. I also
made sure both of the grooves were wiped clean with an oiled cloth prior to
getting them back together.

Hope this helps some
Dianne
D-Stitch Embroidery
www.dstitch.net



-----Original Message-----
From: amayausers-bounce@xxxxxxxxxxxxx
[mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of
jim@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Sent: Saturday, April 16, 2005 8:55 AM
To: amayausers@xxxxxxxxxxxxx
Subject: [amayausers] oops!!!

Can anyone help me put my WACF back together?  I must have picked it up by
the 
driver bar, the whole thing slid to one end and now the driver bar separated

from the unit.

Best Regards,
Jim Keil
Jersey Shore Screen Printing
732.259.4542

Other related posts: