[amayausers] Re: oil applicator bottle

Bebe,
Could you fix the date on your computer? You are a month ahead of everyone else... Thanks...



At 06:20 PM 11/24/2005 -0800, you wrote:

Hi Roland,

I think I have the bottle you have described on hand and I has since called
the technician in to help. He also asked me to turn off the bobbin sensor
and I did and finally my design sewed all the way to the end. That was a
relieve.

I have not asked Melco for the updated version of the design shop or OS. I
am not sure what was out recently. I remember the group talking about it and
I did not pay attention as I did not start up the shop yet. Now I am in full
blast and need to find out what is what and better get the version in quick.

I wil try and call you tomorrow to talk if this is okay with you.

Thank you once again for your help.

Bebe
Empress place



-----Original Message-----
From: amayausers-bounce@xxxxxxxxxxxxx
[mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of Roland R. Irish III
Sent: Saturday, October 22, 2005 5:37 AM
To: amayausers@xxxxxxxxxxxxx
Subject: [amayausers] Re: oil applicator bottle

The machine oil 'applicator' is a clear tube about 1" wide and 4" long-with
a brass 'needle' couple inchs long coming out of the cap. Ours is bent to
make it easier to get the tip into the bobbin assembly area. There is a
'refill' bottle I believe but I'm not sure what that looks like-haven't had
to refill our applicator yet!
Roland







--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.361 / Virus Database: 267.12.4/146 - Release Date: 10/21/2005




Paul Tilton
Sandhills Stitches
Whispering Pines, NC
910-949-3211
www.sandhillsstitches.com


Other related posts: